Author Topic: Engines I have built  (Read 57133 times)

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15459
  • Hampshire, england.
Engines I have built
« on: September 25, 2017, 01:57:03 PM »
In this section of the forum we have threads that help people with problems to do with specific engines. As we don't all look in on the forum as often as some and many builds may have happened before MEM, I thought it might be useful to turn the tables and get people to list what engines they have built. So that members could send them PM's with a  :help:

I suppose I should start, with my engines and any known features  :-\

Atom Minor III - Westbury
AHC Diesel - Motor Boys International (Ken Croft)
Calorific Gauge 1 Stirling locomotive - Roy Key
Centaur Horizontal Gas Engine (Carb problems )
Crosskill Oscillating Steam Engine - Anthony Mount
Double Tangye Steam Engine - Westbury
Double Tandem Compound - Horizontal Steam engine
Easton and Anderson grasshopper beam - Anthony Mount
Felgiebel - Two stroke Aero Engine (chops thumbs  :paranoia: )
Kiwi Four stroke petrol Engine - Westbury
Kittiwake Four Stroke petrol engine - Westbury
Lady Stephanie Beam Engine - Tubal Cain
Mary Beam Engine - Tubal Cain
RLE Horizontal Hit and Miss engine - Alyn Foundry
Robinson Hot Air Engine - Alyn Foundry
Robinson Hot Air Engine - Bruce Engineering
R&B Gas Engine - Bruce Davey  (Ornament - carb problems :facepalm2: also squashes thumbs   ::) )
Steeple Engine - Anthony Mount
Stentor two stroke aero engine - Veron
Stothert and Pitt Beam Engine - Jo Thoms
Stuart No 1 - Stuart Models
Stuart No 9 - Stuart Models
Stuart No 10 Vertical engine - Stuart Models
Stuart Standard Beam Engine - Stuart Models
Stuart 5A - Stuart Models
Stuart Swan - Stuart Models
Titan 60 Glowplug Aero Engine -  Gemaco

and underway:

Boulton and Watt Bell Crank Engine - Anthony Mount
Stuart triple (3 off) - Stuart Models
Wall Wizard - E Wall (Coles Power Models)

So boys are you willing to admit to what you have built /are building?

Jo
« Last Edit: February 15, 2019, 08:02:59 AM by Jo »
Enjoyment is more important than achievement.

Offline crueby

  • Full Member
  • *****
  • Posts: 19888
  • Rochester NY
Re: Engines I have built
« Reply #1 on: September 25, 2017, 02:50:28 PM »
Here's my list:

Stuart Double 10
Stuart Half Beam
Stuart S50
PMR #3
PMR #5
Elmers Tiny
Elmers Tiny variant - 6 cylinder radial
5 Cylinder Radial (own design)
Twin Beam (own design)
MEM Corliss, twin variant
Kozo's New Shay - 3/4":1'
Lombard Log Hauler - 1":1'

Thats so far, anyway!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13860
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Engines I have built
« Reply #2 on: September 25, 2017, 03:10:50 PM »
Here is a list of mine:

Elmers #2 Twin Vertical Wobbler
Elmers #3 Open column w/ reverse
Elmers #14 Wobble Plate Engine
Elmers #23 Tiny
Elmers #24 Beam Engine

PMR #1
PMR #2
PMR #3

Liney Machine RV-1
Liney Thinble engine

Jerry Howell Miser in half scale
Jerry Howell "Vickie" Stirling engine
Jerry Howell Mini Stirling Fan
Jerry Howell Vintage Stirling

Phillip Duclos Flame Licker

Clarence Myers 1/4 scale Rider Ericsson Pumping Engine

Tiny Power 10H engine (may not be available any longer)
Tiny Power Mill Engine (may not be available any longer)

Briggs & Stratton 6S IC Engine (scale model barstock from my own plans)

Tiny Hit & Miss IC engine (plans by Putputman and gbritnell)

Rudy's Radial 5 in half scale

Currently in process: Parsell & Weed from Castings (90% complete)
Pearl Single Cylinder Marine Engine (1/2 scale) from castings (25% complete)
Wright Bros. 1903 engine (scaling from full sized plans) (5% complete and stil on the back burner)


Bill

« Last Edit: September 26, 2017, 12:01:27 PM by b.lindsey »

Offline steam guy willy

  • Full Member
  • *****
  • Posts: 3272
Re: Engines I have built
« Reply #3 on: September 25, 2017, 03:34:20 PM »
And mine.....County Carlow 3 1/2"    unfinished kit
                   
                  Traction engine freelance   unfinished   bar stock
                  Vertical boiler oscillating   solid fuel
                  electrically heated boiler and Persious mill engine    Part Kit
                  Stothart and pit   Kit
                  Mconie    Kit   
                  Bridewell beam engine   Extant copy   Barstock
                  Headley  beam engine 
 Extant copy    Barstock
                  Beeleigh beam engine    extant copy  Barstock

                 and thats all folks..!!
<a href="https://www.youtube.com/watch?v=2EkjRslFgSM" target="_blank">http://www.youtube.com/watch?v=2EkjRslFgSM</a>
and the electrically heated steam crane.......
« Last Edit: September 27, 2017, 07:53:36 PM by steam guy willy »

Offline kvom

  • Full Member
  • *****
  • Posts: 2667
Re: Engines I have built
« Reply #4 on: September 25, 2017, 04:12:39 PM »
Elmer's Beam
Kershel Flame Licker
Elmer's Coomber
Bogstandard's Paddleduck
Liney's 5-cyl Halo Radial
Westbury's Side Paddle Steamer
Muncaster's Joy Valve
Ouzof's Coventry
Benson Engine

Kozo 0-4-0 Penn. Switcher Loco
« Last Edit: September 27, 2017, 08:29:52 PM by kvom »

Offline AOG

  • Full Member
  • ****
  • Posts: 732
Re: Engines I have built
« Reply #5 on: September 25, 2017, 04:29:34 PM »
Here's my list

Stuart ST
Elmer's No 32 tall vertical
Elmer's No 50 educational engine
PMR 3A
Elmer's No 9 twin horizontal wobbler
Liney No 5
PMR 2A
Elmer's Standby
Liney RV-1
Liney Thimble
Elmer's Scotty
Reichart pip-squeak
Elmer's No 7 square
Liney 1
Elderberry Launch Engine
Reeves Popular single
Elmer's No 43 launch engine
Elmer's fancy
Elmer's No. 25
Elmer's No 2 twin vertical
Elmer's beam engine

Tony








Offline crueby

  • Full Member
  • *****
  • Posts: 19888
  • Rochester NY
Re: Engines I have built
« Reply #6 on: September 25, 2017, 04:56:29 PM »
Hey Jo, are you going to start another thread titled "Casting Sets I Have"??   :Lol:

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15459
  • Hampshire, england.
Re: Engines I have built
« Reply #7 on: September 25, 2017, 05:00:08 PM »
Hey Jo, are you going to start another thread titled "Casting Sets I Have"??   :Lol:

I did one of those a few years ago called "guess that casting set"  ::)

But it was only part of the collection  :mischief:

Jo

Edit: P.s. If people knew of all the casting sets I have they may try to talk me out of them  :hellno:
« Last Edit: September 25, 2017, 06:29:55 PM by Jo »
Enjoyment is more important than achievement.

Offline Jasonb

  • Full Member
  • *****
  • Posts: 9870
  • Surrey, UK
Re: Engines I have built
« Reply #8 on: September 25, 2017, 05:39:05 PM »
This is my list.

Stuart 10V
Stuart Beam
James Booth Rectilinear Engine (Anthony Mount)  :embarassed:
Minnie Traction Engine
Zero-Six Open crank hit & miss (much modified)
2" scale Fowler A7 traction engine  :embarassed:
Hoglett   :embarassed:
1/5 scale IHC Famous vertical Screen cooled
1/2 scale Domestic Stove Pipe
1/2 Scale Galloway 5HP
1/6 scale Benson vertical Engine
1/6th Scale Easton & Anderson Beam Engine
Firefly 0.46 glow engine
1/3 scale Baker "ball hopper" Monitor
Nemett Ne15OT opposed twin
1/2 scale gade
2/3 scale Tidman organ engine
1/6 scale Cameron Steam Pump
Jowitt Mk2 Poppet valve engine
5cc Motore da Glow
5cc Motore da Diesel
Jowett Jnr poppet Valve engine
Stuart Lightweight
Muncasters simpel Entablature Engine
Thompston's workshop engine
CHUKY flame licker

On The Go

Own design 1/3 scale Ruston Hornsby BPR open crank
1/2 scale Root & Van Dervoort horizontal with cart
5/16 scale Root & Van Dervoort vertical with cart
1/4 Otto Langen

You can see most of the completed engines in this album

J

PS  :embarassed: means not yet quite completed but all the others are finished and running engines.

Offline Jasonb

  • Full Member
  • *****
  • Posts: 9870
  • Surrey, UK
Re: Engines I have built
« Reply #9 on: September 25, 2017, 05:45:51 PM »
Jo how could you have left your beloved BB1 off of the underway list ::)

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15459
  • Hampshire, england.
Re: Engines I have built
« Reply #10 on: September 25, 2017, 06:10:10 PM »
Jo how could you have left your beloved BB1 off of the underway list ::)

Other than Caloric (Gauge 1 loco which ran but did not have sufficient to power itself along = it was a stationary engine) I have left my vehicles off the engine list  ;)

Jo
Enjoyment is more important than achievement.

Offline bruedney

  • Full Member
  • ****
  • Posts: 408
  • Wellington, New Zealand
Re: Engines I have built
« Reply #11 on: September 25, 2017, 07:09:07 PM »
Here's my list:

Stuart Double 10
Stuart Half Beam
Stuart S50
PMR #3
PMR #5
Elmers Tiny
Elmers Tiny variant - 6 cylinder radial
5 Cylinder Radial (own design)
Twin Beam (own design)
MEM Corliss, twin variant
Kozo's New Shay - 3/4":1'
Lombard Log Hauler - 1":1'

Thats so far, anyway!

Don't forget the mighty Monitor :slap:
‘Results! Why man, I have gotten a lot of results. I know several thousand things that won’t work.’ — Thomas Alva Edison

Offline crueby

  • Full Member
  • *****
  • Posts: 19888
  • Rochester NY
Re: Engines I have built
« Reply #12 on: September 25, 2017, 07:26:49 PM »
Here's my list:

Stuart Double 10
Stuart Half Beam
Stuart S50
PMR #3
PMR #5
Elmers Tiny
Elmers Tiny variant - 6 cylinder radial
5 Cylinder Radial (own design)
Twin Beam (own design)
MEM Corliss, twin variant
Kozo's New Shay - 3/4":1'
Lombard Log Hauler - 1":1'

Thats so far, anyway!

Don't forget the mighty Monitor :slap:


Doh!


Figured I'd forget one!!   :wallbang:


Make that two, also my marine triple!


 :slap:

Offline gbritnell

  • Full Member
  • *****
  • Posts: 2562
Re: Engines I have built
« Reply #13 on: September 25, 2017, 07:34:55 PM »
Hi Ladies and Gentlemen,
Well here goes.

Steam kits:
Stuart                                          Reeves                       Coles Power Models                           Paul Briesch Castings
10V (2)                                        Mary Beam                   1" Case Traction Engine                   Cornwall Blowing Engine
Double 10 (2)
Steam Pump
Twin Launch
Twin Launch Compound
S-10
No. 4

Steam Scratch Built                                                Duplex Steam Pump (From Home Shop Machinist)                            Case Traction Engine (Rudy Kohupt design)
Mini Case Traction Engine                                      Dake square piston engine (From Live Steam)
Mini Stuart 10V                                                      Tiny Horizontal steam from my own lost wax castings.     
Mini Stuart 10V with reverse                                 Tiny Vertical
Mini Stuart 10H                                                      Mini Mary Beam Engine
Mini Stuart Double 10                                           
Mini Stuart Twin Launch

I.C. Engines from Kits:
1/3 Galloway Hit and Miss
1/4 Galloway Hit and Miss
1/6 Galloway Hit and Miss
1/8 Galloway Hit and Miss
Little Brother Hit and Miss (Paul Breisch castings)
Associated Hit and Miss (Paul Briesch castings)
Little York Hit and Miss
Woodpecker Hit and Miss

I.C. Engines Scratch Built                                                Tiny Hit and miss water cooled                                           Topsy Turvy Hit and Miss engine (from Home Shop Machinist)
Inline 4 cylinder OHV engine                                           Tiny Hit and Miss air cooled                                       
1/3 scale 302 V-8 engine                                                Tiny Hit and Miss vertical water cooled
75 H.P. Holt engine                                                         1/3 scale Hit and Miss from Little Brother drawings
V-twin engine                                                                  1/2 scale 3 cylinder from Holt drawings
Ford 300 inline six engine
1/3 scale Fordillac V-8 engine
5 cylinder Radial (loosely based on Morton M-5)
Talent unshared is talent wasted.

Offline Ye-Ole Steam Dude

  • Full Member
  • ****
  • Posts: 1571
  • Deep East Texas on Sam Rayburn Lake
Re: Engines I have built
« Reply #14 on: September 25, 2017, 08:22:03 PM »
Hi Ladies and Gentlemen,
Well here goes.

Sure would like to see photos of the Ford 300 inline six engine.

Thomas
Thomas

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal