Author Topic: Book---"The Shop Wisdom of Philip Duclos"  (Read 9359 times)

Offline Brian Rupnow

  • Full Member
  • *****
  • Posts: 7674
  • Barrie, Ontario Canada
Book---"The Shop Wisdom of Philip Duclos"
« on: September 18, 2013, 07:36:17 PM »
This book sells for about $26 in Canada, and is well worth every penny. It has complete detail drawings for about 6 hit and miss engines, with full technical write ups and pictures, as well as drawings and write ups on flycutters, end-mill sharpeners, and even complete instructions on machining curved spoke flywheels. Probably one of the best books in my collection of machining related literature.

Offline rebush

  • Full Member
  • ****
  • Posts: 39
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #1 on: September 19, 2013, 12:11:21 AM »
Brian: Are there  plans in Shop Wisdom for the Topsy-Turvy? Thanks Roger
Hopelessly lost but making darn good time.

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12778
  • Central Massachusetts, USA
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #2 on: September 19, 2013, 12:14:51 AM »
Roger,

I believe the Topsy Turvy is in there.

I can not confirm it.....I'll have to dig out my copy of the book and confirm it....standby.



Dave
« Last Edit: September 19, 2013, 12:43:34 AM by steamer »
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12778
  • Central Massachusetts, USA
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #3 on: September 19, 2013, 12:48:08 AM »
OK


NO it is not!...it is in the other Duclos book...."Two Shop Masters"

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline rebush

  • Full Member
  • ****
  • Posts: 39
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #4 on: September 19, 2013, 02:41:29 AM »
Thanks Steamer. Roger
Hopelessly lost but making darn good time.

Offline Graham G

  • Full Member
  • ****
  • Posts: 72
  • NZ
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #5 on: January 09, 2014, 02:57:49 AM »
Hi Brian I have PM'ed you.

fcheslop

  • Guest
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #6 on: January 09, 2014, 04:30:14 PM »
Hi Topsy Turvey is in Two Shop Masters Frank McLean and Philip Duclos another canny book.

Offline philjoe5

  • Full Member
  • ****
  • Posts: 1012
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #7 on: January 09, 2014, 05:04:12 PM »
Thanks for the tip Brian.  I found a used copy on eBay and it should be in my hands shortly. :happyreader:

Cheers,
Phil
If you pick up a starving dog and make him prosperous, he will not bite you. This is the principal difference between a dog and a man.  - Mark Twain

Offline sshire

  • Full Member
  • *****
  • Posts: 3044
    • LS Editions
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #8 on: January 09, 2014, 06:06:43 PM »
I bought the book last year just for the curved-spoke flywheel technique and jig. Watch for a curved spoke flywheel on a build in the near future.
Best,
Stan

Offline Brian Rupnow

  • Full Member
  • *****
  • Posts: 7674
  • Barrie, Ontario Canada
Re: Book---"The Shop Wisdom of Philip Duclos"
« Reply #9 on: January 09, 2014, 07:17:32 PM »
Rebush--I'm terribly sorry. I hadn't clicked on "notify" when I posted this, and consequently I never knew anybody had responded to my post. I see that you have your question answered anyways, so I'm glad someone else answered your question.---Brian

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal