Author Topic: Midlands Model Engineering Exhibition 2026  (Read 5650 times)

Offline Sanjay F

  • Full Member
  • *****
  • Posts: 2976
Midlands Model Engineering Exhibition 2026
« on: September 07, 2026, 12:12:03 pm »
Hi all

After 2 previously failed attempts to make this event, I'm finally going to make it!  ;D

I was just wondering whose going and when as it would be great to finally meet some of you face to face. I'll be travelling up for the weekend with the family who are doing their own thing, but can be there either Sat or Sun........

Looking forward to it  :ThumbsUp:
Best regards

Sanjay

Offline steam guy willy

  • Full Member
  • *****
  • Posts: 3679
Re: Midlands Model Engineering Exhibition 2026
« Reply #1 on: September 07, 2026, 12:28:33 pm »
Hi "S" unfortuanately I cannot go as I am still in Rehab and I will also not be able to go to Forncett with all my models on the 6th  October....Take lots of money as the trade stalls have lots of goodies including second hand stuff. 
Willy

Offline mikecole7

  • Full Member
  • ****
  • Posts: 51
Re: Midlands Model Engineering Exhibition 2026
« Reply #2 on: September 07, 2026, 12:56:57 pm »

   Hi all
    I will be on the MEM stand with my engines Thursday and Friday, it would be nice to see a few from MEM, if you can't get near
    come round the back of the tables and have a chat.

   Mike C

Offline Vixen

  • Full Member
  • *****
  • Posts: 3688
  • Hampshire UK
Re: Midlands Model Engineering Exhibition 2026
« Reply #3 on: September 07, 2026, 01:53:53 pm »
Hello All,

I am still hoping to make it this year, having organised, but missed the last two years.

I will also be on the MEM stand with my Mercedes GP engines on Thursday and Friday. I will be alongside Mike Cole, so lots of I/C engine interest for you all to see. I agree it would be nice to meet a few other members face to face, if you do come to the Show, come to the stand and be sure to identify yourselves as MEM members. As Mike C said, if it's busy, just  come round the back of the tables and have a chat.

Cheers

Mike T
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline PaulR

  • Full Member
  • ****
  • Posts: 1647
  • Staffordshire, UK
Re: Midlands Model Engineering Exhibition 2026
« Reply #4 on: September 07, 2026, 04:27:39 pm »
Hoping to be there on either Thursday or Saturday, TBC.

Offline Chipmaster

  • Full Member
  • ****
  • Posts: 1179
Re: Midlands Model Engineering Exhibition 2026
« Reply #5 on: September 07, 2026, 07:09:38 pm »
I will be exhibiting on Saturday and Sunday
Mery Explosive
Rider Ericsson Hot Air Engine
Alyn Foundry Engines;
          Retlas
          Retlas Dynamo
          RLE
          I F Allman
          Chuk
Andy

Offline Twizseven

  • Full Member
  • ****
  • Posts: 828
Re: Midlands Model Engineering Exhibition 2026
« Reply #6 on: September 07, 2026, 09:46:54 pm »
I will be exhibiting on Saturday and Sunday with Andy.

1/4 Scale Redwing,

Alyn Foundry Engines
1/2Scale Robinson Hot Air Engine
CHUK 2

Possibly another couple of small engines to be decided

Colin

Offline Sanjay F

  • Full Member
  • *****
  • Posts: 2976
Re: Midlands Model Engineering Exhibition 2026
« Reply #7 on: September 08, 2026, 03:28:46 pm »
I’ll be attending Saturday, so see you Saturday folks on Saturday 🙂
Best regards

Sanjay

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 5384
  • Boise, Idaho USA
    • Photo Bucket
Re: Midlands Model Engineering Exhibition 2026
« Reply #8 on: September 08, 2026, 03:51:18 pm »
Unrelated question for the UK guys, is the "Midlands" a town or just a geographical location? I see it referred to occasionally and have kind of wondered about it.

Dave

Offline Spinner21

  • Full Member
  • ****
  • Posts: 42
Re: Midlands Model Engineering Exhibition 2026
« Reply #9 on: September 08, 2026, 04:09:40 pm »
Hi Dave, it is a regional area in the centre of England and consists of several of the ancient shire counties plus a new county which contains two of the largest cities in the region, Birmingham and Coventry.
Andy.

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 5384
  • Boise, Idaho USA
    • Photo Bucket
Re: Midlands Model Engineering Exhibition 2026
« Reply #10 on: September 08, 2026, 04:34:52 pm »
Ok thanks!

Dave

Offline Vixen

  • Full Member
  • *****
  • Posts: 3688
  • Hampshire UK
Re: Midlands Model Engineering Exhibition 2026
« Reply #11 on: September 08, 2026, 04:45:03 pm »
Dave,

You guys have the 'Mid West' somewhere between the East and the West coasts. We have the 'Midlands' located in the middle, between the North and South of England.

Mike
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 5384
  • Boise, Idaho USA
    • Photo Bucket
Re: Midlands Model Engineering Exhibition 2026
« Reply #12 on: September 08, 2026, 04:55:13 pm »
Thanks Mike, that makes sense, I just never knew. Does the Midlands go fully east to west, or just kind of an area more round in shape?

Dave
 

Offline Vixen

  • Full Member
  • *****
  • Posts: 3688
  • Hampshire UK
Re: Midlands Model Engineering Exhibition 2026
« Reply #13 on: September 08, 2026, 05:21:21 pm »
Hello Dave,

It's sort of the bit in the middle. There is Wales (a country) to the west and East Anglia (East of England) to the east.
Midlands is the Middle of England

Mike
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 9809
  • Portland, Oregon, USA
Re: Midlands Model Engineering Exhibition 2026
« Reply #14 on: September 08, 2026, 05:47:12 pm »
Your Midlands seems to make more sense than our 'Midwest' which is actually pretty far east!  The whole 'Midwest' is actually on the east side of the country.  Go figure...  The only thing NOT east about it is that it doesn't actually touch the Atlantic Ocean, so it's west of the original colonies.

Kim

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal