Model Engine Maker
General Category => Chatterbox => Topic started by: propforward on June 10, 2021, 11:21:08 PM
-
I've seen other long standing members sell a few things here and there - so in the spirit of wanting to pass these on to a forum member at a significantly lower price than I will try and get on ebay, I am offering them here. Please PM me if interested in any of these. They are simply surplus items because I have obtained other tooling that works better for me.
Myford style quick change tool post - used. Asking $50 plus shipping.
A mix of quite old post and holders, and a few newer ones. All works well, has seen some use - I got these second hand myself. 3 boring bar type holders, 7 standard holders, 2 parting blade holders.
(https://photos.smugmug.com/Stuff/For-Sale/i-jC3xWpL/0/e1295f44/X2/IMG_7261%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-jC3xWpL/A)
(https://photos.smugmug.com/Stuff/For-Sale/i-Bcb8chQ/0/d040533c/X2/IMG_7262%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-Bcb8chQ/A)
(https://photos.smugmug.com/Stuff/For-Sale/i-x7zMS4r/0/709029e4/X2/IMG_7263%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-x7zMS4r/A)
Quantity 4 Mighty Mount equipment levelling pads. Weight capacity 100 to 300 pounds each, with 3/8-16 adjustment bolt and nut. These have been used, but are in good condition. $40 for the set plus shipping.
(https://photos.smugmug.com/Stuff/For-Sale/i-LqrJ7gn/0/f261c880/X2/IMG_7264%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-LqrJ7gn/A)
(https://photos.smugmug.com/Stuff/For-Sale/i-Z5mtDbT/0/82493b5c/X2/IMG_7265%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-Z5mtDbT/A)
Grizzly MT 3 quick change tool holder, with 15 collets. Hardly ever used. $200 plus shipping (retails for $365 plus shipping)
(https://photos.smugmug.com/Stuff/For-Sale/i-hNX3K8W/0/893bd222/X2/IMG_7266%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-hNX3K8W/A)
(https://photos.smugmug.com/Stuff/For-Sale/i-bhnrL7W/0/bc453918/X2/IMG_7267%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-bhnrL7W/A)
(https://photos.smugmug.com/Stuff/For-Sale/i-8Z76kfv/0/e82d81e4/X2/IMG_7268%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-8Z76kfv/A)
South Bend / Grizzly R8 quick change tool holder, with 15 collets. Also hardly ever used. $200 plus shipping. Retails for $360 plus shipping
(https://photos.smugmug.com/Stuff/For-Sale/i-Mkm3p2Q/0/c65c7e3f/X2/IMG_7269%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-Mkm3p2Q/A)
(https://photos.smugmug.com/Stuff/For-Sale/i-5hCkV6W/0/de53283f/X2/IMG_7270%20%28Large%29-X2.jpg) (https://propforward.smugmug.com/Stuff/For-Sale/i-5hCkV6W/A)
Shoot me a PM if interested. I won't bump the thread, if there's no interest I'll just put them on fleabay, or try and find a local home.
They are heavy, so you should probably consider shipping to be around the 50 to 60 dollar mark for the heavy items. The mighty mounts are likely around $15. If interested in any of these, let me know and I can work out an accurate shipping cost.
Not against shipping internationally - but based on what I have experienced over the past year (3 wooly hats to my nephews cost me $60 to ship) I'd say there isn't likely much point going that route.
Cheers, hope I can help someone on the forum out.
Oh yes - paypal is good but you pay the fees, but will accept good old fashioned mailed checks if you like. I'm not in a big hurry, but would like to put the funds towards some other tooling that will be more useful to me. Like a lathe DRO. ;D
-
Interested in the myford quick change what diam is the mounting hole?
Did you make alterations to your set up to fit?
Sent from my SM-T580 using Tapatalk
-
Very good. I will measure the hole diameter in the am. I have not modified the toolpost, all I did was make a custom T nut, bolt and locking handle. Not the best of items but they worked, and you are welcome to those as well. More info in the morning.
-
Thanks. Sorry cant pm in Taptalk. Grrr.
Where are you located?
Ray
Sent from my SM-T580 using Tapatalk
-
No probs! I’m in Minnesota.
-
I'll have to pass I'm in Qld.
Sent from my SM-T580 using Tapatalk
-
Oh! Unfortunate. But understandable.
-
Interested in the Myford stuff, I have the post but if you don't want to separate I understand and would take it too. PM me. I'm in NJ.
-
PM incoming.
In case that doesn't work out, and for anyone wondering, the ID of the toolpost is 0.442", verified with a minus gauge pin.