Model Engine Maker

Help! => Specific Engine Help => Topic started by: paolo1959 on January 26, 2022, 09:07:15 PM

Title: Il mio nuovo motore .My new engine
Post by: paolo1959 on January 26, 2022, 09:07:15 PM

CIAO A TUTTI !!!
GRAZIE AI VOSTRI PREZIOSI CONSIGLI.
Oggi ho messo in moto il mio nuovo motore .
C e ancora molto da fare ,solo che la voglia di vederlo in funzione e tanta !!!
CARATTERISTICHE TECNICHE
Alesaggio 40 mm
Corsa 52 mm
Cilindrata 65 centimetri cubici
Si fa una grande fatica a metterlo in moto a mano.
E vorrei provare a metterlo in moto con la puleggia e corda .
Sono anche indeciso se metterlo sopra al classico carretto oppure fisso ????
HI EVERYONE !!!
THANKS TO YOUR PRECIOUS ADVICE.
Today I started my new engine.
There is still a lot to do, only the desire to see it in operation is a lot !!!
TECHNICAL FEATURES
Bore 40 mm
Stroke 52 mm
Displacement 65 cubic centimeters
It takes a great deal of effort to set it in motion by hand.
And I would like to try to set it in motion with the pulley and rope.
I am also undecided whether to put it on top of the classic cart or fixed ????

Title: Re: Il mio nuovo motore .My new engine
Post by: paolo1959 on January 26, 2022, 09:08:50 PM

https://www.youtube.com/watch?v=G0fsZR_Wmuo

Title: Re: Il mio nuovo motore .My new engine
Post by: Kim on January 26, 2022, 09:24:51 PM

Very cool, Paolo!
Congratulations on a great runner!  :ThumbsUp:

Kim

Title: Re: Il mio nuovo motore .My new engine
Post by: kuhncw on January 26, 2022, 10:29:49 PM

Very well done, Paolo.  Your engine sounds good and idles down nicely.

Chuck

Title: Re: Il mio nuovo motore .My new engine
Post by: RReid on January 27, 2022, 12:26:42 AM

Very nice, Paolo! Congratulations! :cheers: