Model Engine Maker

General Category => Outside Links & Suggested Reading => Topic started by: 90LX_Notch on October 26, 2013, 11:42:45 PM

Title: Professional Machinist Videos
Post by: 90LX_Notch on October 26, 2013, 11:42:45 PM
These are some YouTube Channels done by professional machinists to help amateurs-

http://www.youtube.com/user/KEF791/videos  (Keith Fenner- Turn Wright Machine Works)

http://www.youtube.com/user/Abom79/videos (Adam Booth)

http://www.youtube.com/user/oxtoolco/videos (Tom Lipton- Author of Metal Working Sink or Swim)

http://www.youtube.com/user/Figbash3/videos (Tom's Techniques)


http://www.youtube.com/user/THATLAZYMACHINIST/videos (A teacher but very good.)

https://www.youtube.com/channel/UCxMm_Cq-8nRfVz6niVbVQNQ (Old tech school films from DoAll Co.). Link added 9/30/15
Title: Re: Professional Machinist Videos
Post by: sshire on October 26, 2013, 11:56:47 PM
Excellent! I've watched all of Keith Fenner's videos but wasn't aware of the others.
Thanks
Title: Re: Professional Machinist Videos
Post by: 90LX_Notch on December 12, 2015, 04:14:35 PM
The DoAll videos are worth watching.  There are 50 of them.  There is some really good stuff there.  The YouTube channel is "College Machinist" and is a collection of instructional machine shop videos from the the late 1970's produced by DoAll.

Based on the view numbers for that channel, it doesn't appear that this collection is all that well known.  I would highly recommend them to everyone, no matter what their skill level.


https://www.youtube.com/channel/UCxMm_Cq-8nRfVz6niVbVQNQ (Old tech school films from DoAll Co.).

-Bob
Title: Re: Professional Machinist Videos
Post by: wheeltapper on December 12, 2015, 04:17:40 PM

The DoAll videos are worth watching.  There are 50 of them.  There is some really good stuff there.  The YouTube channel is "College Machinist" and is a collection of instructional machine shop videos from the the late 1970's produced by DoAll.

Based on the view numbers for that channel, it doesn't appear that this collection is all that well known.  I would highly recommend them to everyone, no matter what their skill level.


http://www.youtube.com/user/CollegeMachinist/videos (Old tech school films from DoAll Co.).

-Bob   


I get "this channel does not exist"

Roy.
Title: Re: Professional Machinist Videos
Post by: Bluechip on December 12, 2015, 04:23:50 PM
Try this:

https://www.youtube.com/channel/UCxMm_Cq-8nRfVz6niVbVQNQ

Dave
Title: Re: Professional Machinist Videos
Post by: 90LX_Notch on December 12, 2015, 04:28:22 PM
Thanks Dave.  I fixed the link.

-Bob