Model Engine Maker
About MEM => Introduce Yourself => Topic started by: Steamingandy on November 23, 2021, 09:07:16 PM
-
Hi all, this is the first model engineering forum I have joined so quick introduction, retired engineer with a small workshop that I have rebuilt when my Myford S7 fell through the floor of the shed I had before, I also have a small mill.
Since retirement I have finished a Stuart D10 I started 20 years ago, a Stuart boiler feed pump then did a Stuart triple an engine I have always wanted to make, currently working on a Stuart no1 centrifugal pump, look forward to reading about the builds taking place.
-
Nice intro Andy, welcome aboard!
-
Welcome to the group! Would love to see pictures of your models. :cheers:
-
See if this works can’t find a decent one of the feed pump
-
Very good job on that triple! Those are a difficult engine. Double is great too.
-
:hi: Andy, from another Hampshire Hog ;D
Nice to see someone who has actually finished their triple, I got bored of my three... must finish them one day :ROFL:
Jo
-
Jo They get under your skin what are you waiting for 😉
-
Hi Andy Welcome to MEM!
Very nice engines by the way.
Dave
-
Hi Andy,
Welcome to the forum. Beautiful work on the engines there!
We'd love to see some pics of your shop too if you have any to share. There's a sub-forum called "My Workshop" where people tend to post pictures of their shop. Give us a virtual tour! :)
Welcome aboard!
Kim
-
Welcome! Looks like you've done some very nice work!
-
Hi Andy, these are beautiful engines, might help to get me dragging the set of triple castings out somewhen later! ( Also Hampshire...) Thanks for posting the pictures, Dave
-
Nice job on the tripples.
Is that some form of simpling valve you have on the right hand one to help it run better on air? Though I see from your FB video they both run well even the left hand one which looks standard, the condensers are a nice touch too.
-
Great looking engines! :ThumbsUp: :ThumbsUp: :ThumbsUp:
-
Welcome to the Forum :ThumbsUp: :ThumbsUp:
That's some excellent work :praise2:
-
Nice job on the tripples.
Is that some form of simpling valve you have on the right hand one to help it run better on air? Though I see from your FB video they both run well even the left hand one which looks standard, the condensers are a nice touch too.
Yes Jason it’s a simpling valve not really needed they run fine on air, the mods I made to the valves makes all the difference and all cylinders do some work
-
Hi Andy, these are beautiful engines, might help to get me dragging the set of triple castings out somewhen later! ( Also Hampshire...) Thanks for posting the pictures, Dave
They are a rewarding engines to build and plenty of things to add if you want I want to make a bit of a diorama for them
-
Thanks everyone for the positive comments :ThumbsUp: