Model Engine Maker

Help! => Machines, Tools and Fixtures => Topic started by: paul gough on August 17, 2021, 11:54:00 AM

Title: Tryally Tech QCTP
Post by: paul gough on August 17, 2021, 11:54:00 AM

Here is a link to Luiz Ally's quick change tool holder and tools suitable for Sherline lathes. Anybody seen or used one and any thoughts on them. Now that A2Z is defunct, these might prove worthwhile.
https://tryally.com/qctp-quick-change-tool-post
Regards, Paul Gough.

Title: Re: Tryally Tech QCTP
Post by: Hugh Currin on August 17, 2021, 03:57:48 PM

It looks like the site just started and the QCTP is the first and only product. Interesting.

However, Luiz Ally has done a lot of work and some amazing videos using Sherlines. Very inventive. I've built some tooling based on his videos. Highly recommended, particularly if you're using a Sherline.

Thanks.

Title: Re: Tryally Tech QCTP
Post by: Kim on August 17, 2021, 04:28:01 PM

Huh... I didn't know A2Z was gone :(
What happened?  I have their tool holder for my Taig...

Kim

Title: Re: Tryally Tech QCTP
Post by: paul gough on August 17, 2021, 05:00:15 PM

My understanding is the proprietor died. Paul Gough