General Category > Oddball

Elegent Scroll Frame Skeleton Clock

<< < (223/228) > >>

bent:
"I'll have to see if I can find some of those  :thinking:"

McMaster carries them.  This page is what comes up if you search "cratex" on their site -

https://www.mcmaster.com/products/rubber-bonded-abrasive-points/

Kim:
Thanks Bent!

I actually found a set of the Cratex points on Amazon:
https://www.amazon.com/dp/B07WRMMM3Q?ref=ppx_yo2ov_dt_b_fed_asin_title

They had cheap knock-offs too, but I went with the Cratex.  Those seem to last much longer than the knock-offs, according to the comments at least.  And the Cratex sticks I currently have, I've used for many years and they only show minimal signs of wear, so I do believe they are good quality!

Kim

Krypto:
Cratex also sells mini-kits directly:

https://www.cratex.com/Products/Rubberized-Abrasives/Mini-Kits

It's interesting that the sets are slightly different from their Amazon store.

Kim:
Yes, I noticed that too.  Though I found one of the comments in the Amazon set that said they checked with Cratex and found that they packaged up this set specifically for this seller.  So the claim is that it's authentic Cratex.  Who knows if that's really true or not, but that's what I'm banking on :)

Kim

Kim:
Well, it’s been a while since my last update.  Just looked, and my last update was back in the middle of July - over 3 months ago!  But I have been working away on polishing efforts and taking a few trips here and there to visit my kids.

I was going to take a few polishing in-process shots, but I never really remembered to do that.  Besides, they wouldn't be very exciting anyways.  But I did take a picture of this mishap – I was trying to do a little touch-up work on the winding barrel without taking it all apart, which meant the long cable that connects it to the fusse was still in place.  I was being careful to avoid it, but clearly, not careful enough.  I caught it with the extra-fine 3M abrasive wheel in the Dremel, and it got sucked up instantly and snapped it in two.  :facepalm:


What a rat’s nest!  ::) So I took that assembly apart again, trimmed up the cable, and reassembled things.  That was really the only major mishap that occurred during the finishing process.  But the whole thing was pretty time consuming regardless!

My ‘completed’ stage of polish does NOT come anywhere near the level of ClickSpring, or of any of the other masters on this site.  I have a very low threshold of pain when it comes to this kind of thing, and it got past my ‘good-enough’ meter pretty quickly.  But, since it’s my clock, and my good-enough meter, I’m really quite pleased with it!

With the clock polished to my not-so-exacting standards, I purchased a chunk of oak to make the base from:


Then I ordered a custom plexiglass display case for the clock.  I looked at off the shelf display cases, but couldn’t find anything even close in size.  Anything premade was either too small or too absurdly big (like 24”x24”x24”).  So custom was the way I went.  I also didn’t want to assemble the acrylic panels myself, which was how many places did it.  Cut the panels and send them to you with a tube of glue.  I’ve tried that sort of thing before and I end up leaving glue fingerprints all over the place.  :embarassed: I have a very hard time working meaningfuly with clear acrylic.  So having it professionally done was well worth it to me.  I went with a 8”x10”x17” five sided case of 1/4" acrylic, made by Shop Pop Displays Inc.

I waited a couple of weeks while that was delivered.  I considered working on the base while waiting, but I decided that waiting till I saw the actual size of the opening and such was a better plan.  Sure, I specified the size I wanted, but they quote +/- 1/8” on dimensions, so I decided it was best to just wait.

And it just arrived!  Beautifully packed too!   I could hardly be happier!  And it fits quite well.  I was having a hard time deciding what the final dimensions should be, i.e. how much 'empty space' on each side I should leave, and now I’m glad I didn’t go any smaller!  Otherwise, it would be too hard to lift it on and off the clock.


Now I will start on the base.
Kim

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version