Supporting > Tooling & Machines
Vertical SpinDexer
(1/1)
petertha:
Here is my vertical Spindexer accessory. There are other devices that do this job but I wanted something low profile, quick set up & orientated about my small 3" chucks for fiddly work. I have 3 (Harlingen brand) chucks 3J, 3J-independant & 4J scroll. They are decent quality for the price, mine have sub- 0.002" runout. Just be aware, similar looking ones from China can also be very poor QC.
The bottom plate fits into my 5" mill vise which saves me removing the vise to mount a rotary table. The bottom plate has 10-deg hole divisions, the top has 9, so that yields 1-deg increments. I made the top plate with divisions on both sides of zero so I can index in either direction. I first made a 3DP a prototype. I could have made a metal one on my rotary table but I've been itching to try an offshore CNC service with a coupon to burn. I had it made from 6061 to keep the cost & weight down. But now that I have it, I'm kind of kicking myself I didn't go steel. Oh well, just have to be gentle. I suspect the zero hole will get the most wear. I made a brass pin, not sure that will help or not.
The base plate & chuck plate have 2 different diameter center holes which I did intentionally, so I could turn a nice fitting matching collar bushing to suite. That way its concentric, one surface a close sliding fit, the other very light interference. I made it from UHMW just because it was handy but metal would be better. Same for the hold-downs although I'm guessing 3DP would work just as well. The increment lines were a bit of leap of faith, they are just 1mm dia shallow endmill slots. I didnt want to get into numbering them, especially because I want to go in either direction, so just need it count carefully. Now it stime to use it & see what other features I should have thought of. One thing crossed my mind. I said Vertical, but really the plate could reside at some angle in the vise jaws just as easy, more utility.
Sanjay F:
That's really cool and simple to use, very nice :ThumbsUp: :ThumbsUp:
Kim:
That's pretty clever! :)
Kim
JackPick:
^^^ What they said.
Rledoux313:
I like that solution. I’ll have to remember that one.
Navigation
[0] Message Index
Go to full version