Engines > Your Own Design

Big stroke 55 cc one cylinder ICE

<< < (3/38) > >>

b.lindsey:
Also following your progress Alex.  Nice documentation of the parts so far.

Bill

Plani:
Interesting Build! Keep the pictures comig  ;) :popcorn:

Plani

AlexS:
Connecting rod and small-end assembly. I had the idea to fit a 15 mm outside diameter for the small-end bearing. But unfortunately there are no 15 mm drill or cutter. :noidea:

Because of that, I have made a part of material C45 to fit the bearing.

AlexS:
First (rough) work on the carter. Plates  are 6 mm. The squired profiles are 20x20. On the left and right side there would be a plate of polycarbonate, to look inside the engine (if you can see something with running the engine full of oil ;).

Roger B:
An interesting build  :ThumbsUp: Larger than I can do with my machines. There is a lot of experimentation possible with camshafts, valves etc.  :wine1:

Navigation

[0] Message Index

[#] Next page

[*] Previous page