Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Thanks, crueby. I did check, and the port was not visible when moving the valve forward, so I elongated the port and it now opens when the valve is moved forward. However, that did not make it work. Also, as a reminder, I have not yet made the eccentric. By the way, no gasket on this engine, at least not that I saw in the plans.
Thanks, crueby. I did check, and the port was not visible when moving the valve forward, so I elongated the port and it now opens when the valve is moved forward. However, that did not make it work