The Showcase > Shows

Pictures of my machines.

(1/5) > >>

Bruno Mueller:
In loose arrangement I would like to show you here the pictures of my machines.
There will be Steam Engines, Stirling Engines, Tool Equipment and other small parts.
In the last 30 years a lot of different things have come together.

I would like to start with my first work. This machine was made with an Emco 3, with milling accessories.
It is a combination of different designs that I found in books.

Bruno Mueller:
The next machine I ordered as a material set from the manufacturer Regner and also worked with the Emco3.
I modified the machine a bit and made the cylinder diameter to 16mm.Furthermore the crosshead was changed and the crankshaft was enlarged a little bit in the dimension. A somewhat larger flywheel was also installed. 

Jo:
Nice  :)

Unusual to see a horizontal engine with reversing gear.

Jo

Bruno Mueller:
Some of you may know the next machine. Trojan of Reeves.
This is a machine I made on a metric scale. For this purpose I have modified the original drawings and adapted them to the metric system.
The machine drives a small generator which gives power to a street lamp.
The generator was made from a bicycle dynamo.

Bruno Mueller:
I built two steam feed pumps for 7 1/2" locomotives for a friend last year.
Steam piston diameter 30mm.
Piston stroke 40mm.
Water piston diameter 16mm.
The pump body was made of bronze. The covers were made of brass. Piston rod and pilot piston are made of stainless steel.
The total weight of a pump is about 1,7kg.
The total height is approx. 170mm.

Navigation

[0] Message Index

[#] Next page