Supporting > Additive Machining

3d printed box for gear cutters

(1/3) > >>

awake:
I have recently acquired two full sets of gear cutters, M1 and M0.8 ... and I needed a better way to store them. A bit of work in OpenSCAD, and voila! See the pictures below.

The M1 cutters are 50mm diameter and 4.2mm thick; the M0.8 cutters are 40mm diameter and 4mm thick. The .stl files are too large to attach here, so I have uploaded them here:

http://www.wakefieldphd.com/hobbies/gear_cutter_box_40mm.stl
http://www.wakefieldphd.com/hobbies/gear_cutter_box_50mm.stl

gerritv:
Beautiful implementation, the white seems appropriate

Gerrit

Vixen:
Andy,

I am having difficulties opening your attachments. They appear to be txt files despite the STL in the file name.

Mike

gerritv:
On Windows right click, then Save As will save the file as an .stl

Gerrit

crueby:
Nice setup, I need to make something like that for my sets, rather than just strewn in the drawer!

Navigation

[0] Message Index

[#] Next page