Author Topic: Small 3D Printers  (Read 4883 times)

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 2002
  • Independence, Oregon
Re: Small 3D Printers
« Reply #15 on: January 22, 2020, 02:47:20 AM »
Jim

Take a look at the Dremel 3D20 it is very much work out of the box.

They just do what they say they will do in standard configuration.

I am now running carbon fibre filled PLA through mine with great results.

Barrie

Thanks for the input Barrie. I just had a quick look at it ..................looks pretty nice.  :ThumbsUp: I'm sure I'll be back with more questions after I check it out.

Also, welcome to Model Engine Maker. It looks like you've been registered for a while..............glad to see a post from you. Lots of nice folks here.

When you feel up to it, please post in the "Introduction" forum. We'd like to know what you're interested in (obviously 3D printing for one thing).  :)

Cheers,  :cheers: Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal