Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
I am calling an end to the day... It is wired up and the wiring looks like that in the manual As a retired Electronics engineer it is not staying like that I am going to read the manual now, then more tomorrow... Jo
If it's a JST-XH I may have some spares (or even some pigtails, which would side-step the crimp tool issue). Ping me a photo and If I have something I might drop it over tomorrow morning (I don't go back to work until wednesday).AS
If you can draw it you can print it. For most of my printing I use PLA unless I need higher temperature capability. Never got on with ABS; darn stuff wouldn't stick to the heated baseplate and seemed to suffer for distortion.Andrew
This is the missing connector Pete, if you have any it would be very useful and avoid delays
I'll drop it over in the morning - let me know if you also want some heatshrink to cover the solder joints with.
Those look like the connector beasties but I am not waiting for them to turn up on the slow boat from China As this is the second time I have needed one of these I've ordered a box of 560 of various sizes of them should be here in a couple of days (not going to try getting the Chinese supplier to replace them could be waiting ages) My crimping tool will be a pair of pliers Any suggestions Dave, or any one else, on fun things to make I am all ears. I believe a bezel is on the order list so far.I am calling an end to the day... It is wired up and the wiring looks like that in the manual As a retired Electronics engineer it is not staying like that I am going to read the manual now, then more tomorrow... Jo