Engines > Your Own Design
Steam engine (Tiny horizontal double acting, maybe with reverse)
gbritnell:
Gentlemen,
One more engine in the 'Tiny' series. This time a horizontal version. I might even make it with a reverse mechanism. There was no way to cut the entire base from one piece so I layed out the base to see how I could make it in 2 pieces and still have it look like a casting, or 1 piece. By cuttting a slot in the base and recessing the side wall of the cylinder a little for it to overhang the top surface it almost looks like one piece. The cylinder is mounted with 2, 0-80 socket head screws from underneath.
gbritnell
Jo:
Wow George 8),
I am following this with great interest.
Jo
rebush:
George: Nicely done on such a small scale. Will be following along also. Thanks for posting your build. Roger
zeeprogrammer:
I'll be watching too.
Is that cloth 1 or 2 tpi?
Don1966:
Count me in on this one also George. I am pulling up a chair.
Don
Navigation
[0] Message Index
[#] Next page
Go to full version