Supporting > Tooling & Machines

Coax Indicator, designed by W.K.Todd

(1/10) > >>

fumopuc:
Hi everybody,
I am trying to make one, here the slightly modified design and were I am today.

BillTodd:
Looks good,

 It's really a buzz to see someone making something I designed  :pinkelephant:

Were the drawing ok, were you able to follow my description?

Bill

P.s the pdf is on my google drive here:

https://drive.google.com/file/d/0BwXDcXKx2KzlaUVrZ0l6QU4yaTA/view?usp=drivesdk

fumopuc:
Hi Bill,
thanks for the link to your drawings.
It seems that I have downloaded the same set some time ago, I think via MadModder.
During the last summer I have redrawn everything in Fusion 360 and I have started the making now.
For me the information of the real shape and dimension of the rocker was a bit weak, so I have imported the picture into Fusion and the software has calculated everything by given the dimension of a known whole, 4 mm.
Progress will be shown here.

fumopuc:
... and the up date from this afternoon.
The two aluminum parts are fitted togther with some epoxy glue and cured in the oven at 100°C.
My fingers should give an idea about the overall dimension.
Currently I am playing a bit with Fusion CAM.

Vixen:
Hi Bill and Achim,

This coaxial indicator looks very useful and has been added to my 'to do' list   :ThumbsUp: :ThumbsUp:

Do you find it more convenient to have the dial facing forward of facing upward? I am thinking about the view of the dial, when you swing it through 360 degrees.

Mike

Navigation

[0] Message Index

[#] Next page