Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Yes, welcome to 2021 Achim [from Australia] During my apprenticeship 50+ years ago, I spent some time working on maintenance to Cooling Towers.......[huge multi story Towers - 4" NB inlet and outlet pipework - 'Air Blast' water fall type with huge volumes of ambient air blown over the water cascading thru the labyrinth of wooden slats, so fans, motor V-Belt drives, replacement wooden slat shell etc]I was aware of minature closed loop fluid filled PC cooling radiators, however amazed to see the open loop versionsMaybe a little premature, but will you use a % of glycol or similar, to protect engine or system metals and also reduce the chance of the fluid becoming rancid?From practical purposes in actual cooling towers, an isolation valve on the inlet side of the tower would allow for maintenance on the tower internals, however also importantly maintaining a head of cooling water in the engine Always looking forward to your thread postingsDerek
Happy New Years to you Achim and the engine is awesome....... Don
This would be more in line with it being a kind of Industrial installation .... a naked radiator so to speak.