Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Tom - this is a "sort of" kit-set job. I bought the various parts from a range of suppliers following the standard RepRap Prusa Mendel (v2) design. Printed parts from on place, rods/rails/bearings motors from another, hotted electronics from yet another. Put it all together.Cheers,James.
Quote from: Joco on January 06, 2017, 05:07:29 AMTom - this is a "sort of" kit-set job. I bought the various parts from a range of suppliers following the standard RepRap Prusa Mendel (v2) design. Printed parts from on place, rods/rails/bearings motors from another, hotted electronics from yet another. Put it all together.Cheers,James.I looked at doing that at first, but I wasn't sure of my electronics skills to get it done. Now, with more experience, and the knowledge of where to look for help, I might give it a go. I would like a bit larger building area ... 300 x 300 x 300 or so and I would like the bed to just go up and down, not back and forth as it does now.Tom