General Category > Oddball
Koch indicator
(1/1)
V 45:
Hello all...I didn't really know what section to put this in...so here is an old Koch indicator I found in a box lot at the auction. It's pretty cool and in good shape. The hash marks are .0001". I have never seen one of these before. The patent date is from 1906 !! I'm guessing it's the predecessor to the best test and the like. V 45
b.lindsey:
Interesting find !! I see there are a couple on e-bay at the moment. These old instruments are fascinating i think and really given the time, the mechanical ones really haven't changed that much. Thanks for sharing the picture.
Bill
V 45:
I looked on the bay site and saw them after you had posted...I thought they might be a little more than that. I got a whole box of machinist tools for 3 bucs. It was worth it just for the 3 in starret square.
Dave
b.lindsey:
Sounds like you hit the jackpot then :) !!! Even if you don't use them, the old Starrett stuff is just fin to have around.
Bill
Maryak:
Lucky you,
I've been searching for one similar to that for a long time. When I was an apprentice we were only allowed to use a dial indicator on bright or machined stock. For black bar we used a similar idea to the Koch. it had a ball end which rested on the work and formed the horizontal part of a bell crank. The vertical part of the bell crank formed a point against a scale on the body and worked against a spring. The working range was about 0.050"
Best Regards
Bob
Navigation
[0] Message Index
Go to full version