Help! > Hints, Tips & Tricks

A very good Blog

(1/2) > >>

Bogstandard:
I started to have a look at this blog, by a gent called Rob, a few years ago, after he asked me for permission to put the plans of my 'Paddleducks Engine' on there, and it has been growing ever since.

One thing I really like about it, the first is that anything on there in relation to peoples articles, he has asked permission of the originator, and second, he always gives due recognition to anything that is shown.

http://www.machinistblog.com/

It is a gold mine of all sorts of projects, hints and tips and almost anything you can think of in relation to what we get up to, and I am sure everyone who visits comes away with at least one tip, maybe lots, they have never seen before.

Just as an example, the 'Contrary Tool'.
 
If you are having trouble getting fine finishes on your lathe, have a look at this article. You just couldn't get an easier to grind and use tool. A couple of flats, and there is no centre height to be set.

http://www.machinistblog.com/?s=contrary+tool

Just enjoy.

John

steamer:
I've heard that tool called a "shaving" tool somewhere in the old literature...but showed a differant configuration....this seems much easier to make and keep sharp....I'll need to try it out!

Thanks John!

Dave

chuck foster:
thanks for the link john, i have book marked it for future reference.

chuck

vcutajar:
Thanks John for the link.  You're right.  It's a treasure trove of information.  I have to explore it more.

Vince

ironman123:
Chaulk another good deed for Bogs. :ThumbsUp: :ThumbsUp:  Thanks John, it will take me a while to go through that but looks very interesting.

Ray

Navigation

[0] Message Index

[#] Next page

Go to full version