Author Topic: Screw cutting charts  (Read 3617 times)

Offline John S

  • Full Member
  • ****
  • Posts: 141
Screw cutting charts
« on: August 05, 2012, 11:11:31 PM »
Bought a laser cutter / engraver a few weeks ago and been playing with some of the metallic laminate made for these machines.

Don't know whether these sort of posts are allowed as John said he didn't want to include machines so just cover the plate.



This is an imperial chart for a metric C3 lathe and I'm quite pleased with the result [ after 4 goes, but we won't mention that  :ROFL: ]
John Stevenson, Nottingham , England

Offline tel

  • Full Member
  • ****
  • Posts: 1657
  • Bathurst District, NSW, Oz.
Re: Screw cutting charts
« Reply #1 on: August 06, 2012, 12:23:42 AM »
Very impressive result John, I like it.
The older I get, the better I was.
Lacerta es reptiles quisnam mos non exsisto accuso nusquam

Bogstandard

  • Guest
Re: Screw cutting charts
« Reply #2 on: August 06, 2012, 06:25:58 AM »
John,

Something like this is just fine.

Anything not too large that interests the members, and I am sure a few people who are doing restorations would love to know all about it.

You've just got to get them to ask.

As you know, we've talked about this on the phone, and once I saw what you have achieved above, I understand it all a lot better now.

John

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal