Another Hodgson Radial 9

[Camm-1]

Testing oilpumps. Working

Skickat från min SM-G960F via Tapatalk

[Admiral_dk]

Oh yes - much better to be safe than sorry afterwards 

[90LX_Notch]

Looking good Camm.

-Bob

[scc]

Ove, I have just read this thread from the beginning     Amazing craftsmanship   You must be pleased with your results       regards             Terry

[Camm-1]

Thank you. Well I am pleased so far but hope it will run to.
It is 7 years since I start building it I think.
5 years it have been down for moving and restoring house and now I hope to fire it up soon

Skickat från min SM-G960F via Tapatalk

[Camm-1]

Maked a couple of pushrods out of motorbikespokes 2.6 mm.
Bought 10 enough to 20

Skickat från min SM-G960F via Tapatalk

[Vixen]

Hello Camm,

2.6mm bike spokes? An interesting choice of nice strong raw material.

The engine looks beautiful.   

But then, I always like round engines. 

Mike

[Camm-1]

Time to silver solder. I dont know how it will go. I never had any sucses with that

Skickat från min SM-G960F via Tapatalk

[Camm-1]

Thanks to covid I stay home for a week. Got one dose ofvaccin before so just a bit snory.
So got a lot of time in the shop to work.
Now I waiting for more stainless pipe for the intakes the post manage to loose it somewere. Its the only thing left ecept the tanks and stand and wires and so on
.
Ove

Skickat från min SM-G960F via Tapatalk

[Camm-1]

I was a bit nervous how it would go but they turn out ok.

Skickat från min SM-G960F via Tapatalk

[Roger B]

Excellent manifolds     

[Admiral_dk]

Looks like you didn't have to worry that much - nice result and closer to first Pop 

[Camm-1]

Took I wile to adjust the pipes to fit whithout to much binding.
Today I whant to do the sparkwires but dont have some good to put in the plug end.

Skickat från min SM-G960F via Tapatalk

[Camm-1]

Hello
Yesterday I fired her up for the thirst time. After some testing whithout any pop I recognised that
I had timed the ignition on Wrong TDC. And I put on a smaller carb the it happens.
Here are a short not good video. You have to turn your head around after a wile


<a href="https://www.youtube.com/watch?v=yBUOLWVC3RQ" target="_blank">http://www.youtube.com/watch?v=yBUOLWVC3RQ</a>

[ShopShoe]

Congratulations!

It looks like you're coming to the end of this project.

I like the sound of it so far.

Thank You for posting,

ShopShoe