Supporting > Tooling & Machines

Myfored saddle stop

(1/2) > >>

Firebird:
Hi

another one of those should have done it years ago things. Once again no plans just build to fit. The round bar is 8mm and came out of an old printer.







Cheers

Rich

arnoldb:
Nice going Rich  ;D

As useful as the Myford's gap bed is, it does make life harder when trying to use a bed-mounted saddle stop.

 :) I also like roundy bits out of old printers!

Kind regards, Arnold

Stuart:
Nice work but having  a 7B  ( with gear box ) fills that area up

a neat solution using the tapped holes that are present

I have built the Hemingway one that fits on the TS end and connects to the thread dial stud


works well
http://www.hemingwaykits.com/acatalog/Multi_Position_Saddle_Stop___Myford_7_Series.html


Stuart

tel:
Nice one Rich, almost in the same spot as mine.

My lathe was not cleaned up for this pic, BTW. ;)

arnoldb:

--- Quote ---My lathe was not cleaned up for this pic, BTW.
--- End quote ---
Looks much too tidy to me Tel - you should make some chips for a change.

Navigation

[0] Message Index

[#] Next page