« previous next »
Pages: [1]   Go Down

Author Topic: Line boring on the lathe  (Read 489 times)

Offline Randy

  • Full Member
  • ****
  • Posts: 5
Line boring on the lathe
« on: July 08, 2025, 12:33:47 PM »
These are some pics of the tooling I made for doing line boring on my lathe. It has some bars with T-slots in them that bolt to the saddle. Then the adjuster go in to adjust the height of your work, and the second plate goes on top of the adjusters, That plate has T-slots also.
« Last Edit: July 08, 2025, 12:41:19 PM by Randy »
Logged

Offline nj111

  • Full Member
  • ****
  • Posts: 154
Re: Line boring on the lathe
« Reply #1 on: July 08, 2025, 12:49:35 PM »
Looks like that arrangement will make light work of the bore!
Logged
Nick

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 12917
  • Central Massachusetts, USA
Re: Line boring on the lathe
« Reply #2 on: July 08, 2025, 08:04:02 PM »
I made a similar rig for my 12" Logan that worked a treat!

https://www.modelenginemaker.com/index.php/topic,369.0.html

Post  2 and 93

Dave


Logged
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline Don1966

  • Full Member
  • *****
  • Posts: 6847
  • Columbia, MS
Re: Line boring on the lathe
« Reply #3 on: July 09, 2025, 12:24:21 AM »
That is an awesome setup…. :cheers:

Don
Logged
Pages: [1]   Go Up
« previous next »
 
SimplePortal 2.3.5 © 2008-2012, SimplePortal