Supporting > Tooling & Machines

For sale-- Emco Unimat SL

(1/1)

Bruno Mueller:
I have a refurbished Emco Unimat SL for sale. The machine has been completely disassembled, cleaned and painted in a two-tone color.
The bearings have been cleaned and regreased. The bearings of the feed roller have been replaced. Two drive belts have been replaced. The feed spindles run in thrust washers so that the spindles do not work their way into the machine material. The spindles run backlash-free in the thread. The tailstock quill was replaced.
The machine is driven by a 24 V DC Dunkermotor. The only accessories included are a three-jaw lathe chuck and a toolpost.

Navigation

[0] Message Index