MEM at the 2025 Midland Model Engineering Exhibition (MMEX2025)

[Dave Otto]

Thanks Andy,
Very nice display and great photos.

Dave

[propforward]

Excellent display - thanks for sharing all the pics.

[Chipswitheverything]

Great to see the photos of many fine models, thanks Andy for posting these. The several tandem compound mill engines are particularly nice.  Dave

[Alex]

I'll add a +1 for the thanks for photos, and for people willing and able to go and exhibit.

I've been to the MMEX, and some of the Model Engineer exhibitions, but the flying over the Atlantic means that it is not a short jaunt down the motorway - so taking the time to exhibit, and photograph, AND posting pictures/videos is appreciated.  John

[Sanjay F]

Looks like a great event with lot's of great engines on display.........thanks to all who posted videos and photos for those of us who couldn't make it 

[scalemodel]

Thank you to Andy, sam Mike and Colin for flying the flag for model engine maker at the exhibition you put on a excellent display and it made a nice change from  seeing all the locos that was there.

I must make a effort to join you next year, I will start saving for a hotel now

Jonathan

[Laurentic]

What a lot of lovely engines!

Many, many, thanks to all who made this happen, from Mike for organising it, to the four guys manning the stand and to all those who supplied models and posted the many photos and videos on here.  For someone stuck in France and unable to visit in person as had been intended, it really made my day to see this thread.  Very much appreciated, one and all.

Chris

[steam guy willy]

Thanks for the pics and the commentary and I would love to be a part of this in the future.
cheers
Willy

[Vixen]

What a lot of lovely engines!

Many, many, thanks to all who made this happen, from Mike for organising it, to the four guys manning the stand and to all those who supplied models and posted the many photos and videos on here.  For someone stuck in France and unable to visit in person as had been intended, it really made my day to see this thread.  Very much appreciated, one and all.

Chris

We should not forget Mike Cole, who single-handed manned the MEM stand on Thursday and Friday with his superb collection of radial and i/c engines. I think these engines could be seen on one of the videos. I had hoped to join Mike Cole on the Thursday but did not feel up it on the day. 

Mike

[mikecole7]

  Thank you Mike, yes I was there on Thurs and Friday with a friend who moves the heavy engines for me,we had lots of interest
 on both days. I had a small banner printed and we pined it onto the back wall behind the tables, also I had 120 business cards
 printed to hand out to those who were interested. Most of my aero engines are on the youtube video.
  The organizers were very helpful on both days we were there, we had a good time though we were driving160miles a day   
  Thanks again Mike for the paperwork it worked well.
 
    Mike C

[PaulR]

  Thank you Mike, yes I was there on Thurs and Friday with a friend who moves the heavy engines for me,we had lots of interest
 on both days. I had a small banner printed and we pined it onto the back wall behind the tables, also I had 120 business cards
 printed to hand out to those who were interested. Most of my aero engines are on the youtube video.
  The organizers were very helpful on both days we were there, we had a good time though we were driving160miles a day   
  Thanks again Mike for the paperwork it worked well.
 
    Mike C

I planned to say 'hello' but you were swamped with visitors both times I came by.

[Laurentic]

Apologies for the omission Mike C - i did not realise until Vixen said, you were of course included in my thanks if not named!

My appreciateion for all involved remains undiminished - excellent job all round!

Perhaps next year.............

Chris