Author Topic: Glue For PLA+ and Others  (Read 2891 times)

Offline cnr6400

  • Full Member
  • *****
  • Posts: 3344
Re: Glue For PLA+ and Others
« Reply #30 on: January 20, 2025, 07:40:44 PM »
 :ThumbsUp: :ThumbsUp: :ThumbsUp: :popcorn: :popcorn: :popcorn: :cheers:
"I've cut that stock three times, and it's still too short!"

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 1010
  • Lindsay, Ontario, Canada
Re: Glue For PLA+ and Others
« Reply #31 on: January 21, 2025, 04:11:04 PM »
The Zap worked well. I still need to pick out the wee hour markers and for some reason it hangs a bit crooked but it is on the wall and working.

I will be in the next town next week for my eye shot and they have a Micheals there so I can get some slightly longer hands.

 :cheers:

I was cut out to be rich ... but ... I was sewn up all wrong!

Offline crueby

  • Full Member
  • *****
  • Posts: 20239
  • Rochester NY
Re: Glue For PLA+ and Others
« Reply #32 on: January 21, 2025, 04:13:28 PM »
Looks great!

Did you drill a hole in the back to hang it, or just hang it on the inside of the hub? On mine, I drilled a hole near the rim on the back face.

Hmm, now we need to design and print the rest of the engine that this gear is part of!   :o

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 1010
  • Lindsay, Ontario, Canada
Re: Glue For PLA+ and Others
« Reply #33 on: January 21, 2025, 05:09:52 PM »
You had put half round holes in some of the mating segments so I made one of those joints the top and drilled it out a bit and hung ot on a nail.

I have another one printed and it will go together next week when I get another movement.

 :cheers:
I was cut out to be rich ... but ... I was sewn up all wrong!

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal