Author Topic: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine  (Read 602 times)

Offline sbwhart

  • Full Member
  • ****
  • Posts: 745
  • Live Long and Prosper
Made a start on this miniature engine with the crank shaft and cylinder completed

I'm struggling to post pictures picture size too large what do you guys use to reduce the size of pictures

Stew
A little bit of clearance never got in the way

Offline crueby

  • Full Member
  • *****
  • Posts: 18987
  • Rochester NY
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #1 on: February 03, 2024, 03:19:07 PM »
Most any photo editor will let you scale pictures down to a lower height and width, even the simple Paint app in windows.  What platform are you on, PC, Mac, Linux, etc?

Offline Mike R

  • Full Member
  • ****
  • Posts: 169
  • Ottawa, ON
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #2 on: February 03, 2024, 09:32:12 PM »
Not affiliated but have used this software in the past when wanting to resize many pictures - paint is fine for 1 or 2 but doing many is painful.  This software lets you resize a batch (or whole folder) at once, and insert a watermark at the same time.

https://www.faststone.org/FSResizerDetail.htm

Mike

Offline simplyloco

  • Full Member
  • ****
  • Posts: 609
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #3 on: February 03, 2024, 10:43:02 PM »
Did you hear about the guy who put his wife under the bed each night as he thought she was a little potty?
I'll get my coat...
Strong minds discuss ideas, average minds discuss events, weak minds discuss people. ― Socrates

Offline crueby

  • Full Member
  • *****
  • Posts: 18987
  • Rochester NY
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #4 on: February 03, 2024, 10:49:28 PM »
Did you hear about the guy who put his wife under the bed each night as he thought she was a little potty?
I'll get my coat...


 :facepalm2:

Offline sbwhart

  • Full Member
  • ****
  • Posts: 745
  • Live Long and Prosper
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #5 on: February 04, 2024, 09:02:58 AM »
Groan what a corny joke  :Jester:

Thanks for the fast stone link.

so lets try again

A little bit of clearance never got in the way

Offline sbwhart

  • Full Member
  • ****
  • Posts: 745
  • Live Long and Prosper
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #6 on: February 04, 2024, 09:07:58 AM »
Cylinder

A little bit of clearance never got in the way

Offline sbwhart

  • Full Member
  • ****
  • Posts: 745
  • Live Long and Prosper
Re: Miniature "Potty" Lads and Dads Open Frame Horizontal Mill Engine
« Reply #7 on: February 04, 2024, 09:58:57 AM »
More
A little bit of clearance never got in the way

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal