Author Topic: Cabin Fever 2024  (Read 5961 times)

Offline Art K

  • Full Member
  • ****
  • Posts: 1821
  • Madison, Wisconsin USA
Re: Cabin Fever 2024
« Reply #15 on: February 11, 2024, 10:53:36 PM »
Sorry It has taken so long to post some photo's. I will start with my table and the MEM guys around me and expand from there.

The bolt with nut is 1 3/4-5, the rest are trick bolts. On the right is my Val engine and on the left is a clever steam engine using planetary gears and a set of 2 to 1 reduction gears to operate the eccentric made by a friend in Lancaster.



The MEM crew was well represented by Scott, Dave, Dan & Sid.





At my back was a collection of CO2 airplane engines, steam and sterling engines.


Now before I run against the photo limit I will post this.
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline Art K

  • Full Member
  • ****
  • Posts: 1821
  • Madison, Wisconsin USA
Re: Cabin Fever 2024
« Reply #16 on: February 11, 2024, 11:36:01 PM »
If you want wanted some glass plate photography, Art here is your man!

The cloth in the left hand corner of the shot is covering the camera.

Here are some clever steam engines!



And for the steam train crowd.


Now just some random engines.








More in the next post!
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline Art K

  • Full Member
  • ****
  • Posts: 1821
  • Madison, Wisconsin USA
Re: Cabin Fever 2024
« Reply #17 on: February 11, 2024, 11:45:27 PM »
And quick before I run out of gas.

Yeah this is my favorite rat trap!






It was extremely busy both days, some of the photos reflect this. Others were taken on Thursday after setting up.
That's it, enjoy!
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Online crueby

  • Full Member
  • *****
  • Posts: 19844
  • Rochester NY
Re: Cabin Fever 2024
« Reply #18 on: February 12, 2024, 02:25:12 AM »
Great pictures,  thanks!

Online Jasonb

  • Full Member
  • *****
  • Posts: 9862
  • Surrey, UK
Re: Cabin Fever 2024
« Reply #19 on: February 12, 2024, 07:13:41 AM »
Thanks for posting those

Offline Chipswitheverything

  • Full Member
  • ****
  • Posts: 597
Re: Cabin Fever 2024
« Reply #20 on: February 12, 2024, 08:51:03 AM »
Many thanks for the excellent photo coverage, enjoyed the pictures very much. Dave

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15458
  • Hampshire, england.
Re: Cabin Fever 2024
« Reply #21 on: February 12, 2024, 09:27:48 AM »
 8) Lots of faces and engines I recognise in those. Great to see you guys know how to put on a real model show

Jo
Enjoyment is more important than achievement.

Offline Twizseven

  • Full Member
  • ****
  • Posts: 807
Re: Cabin Fever 2024
« Reply #22 on: February 12, 2024, 09:54:43 AM »
That looks fantastic.  Good to see you can run your engines.

Colin

Offline Vixen

  • Full Member
  • *****
  • Posts: 3334
  • Hampshire UK
Re: Cabin Fever 2024
« Reply #23 on: February 12, 2024, 12:01:32 PM »
Thank you for the photos Art,

It's good to see such a well attended show, organised for the benefit of the exhibitors, rather than just to rip-off the visitors at the door.
Some UK show organisers could learn from that.   :thinking:

Mike
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline SteamR

  • Full Member
  • ****
  • Posts: 58
Re: Cabin Fever 2024
« Reply #24 on: February 12, 2024, 12:12:15 PM »
Thank you posting the pictures.
These are a lot of interesting models from high quality craftmanship.
Unfortunately for me it is a too far distance to visit this great exhibition ;D.

Richard

Offline RReid

  • Full Member
  • ****
  • Posts: 1900
  • Northern California
Re: Cabin Fever 2024
« Reply #25 on: February 12, 2024, 04:40:34 PM »
Great to see the pics, Art. Thank you!
Regards,
Ron

Offline Krypto

  • Full Member
  • ****
  • Posts: 168
Re: Cabin Fever 2024
« Reply #26 on: February 12, 2024, 07:01:18 PM »
This isn't my video, but Gil did a nice walk-through of the 2024 Cabin Fever show which may be of interest for those who cannot attend:

<a href="https://www.youtube.com/watch?v=PX9BxinYI1I" target="_blank">http://www.youtube.com/watch?v=PX9BxinYI1I</a>

In the middle of the video he showed a shot of the Saturday crowds where it can get so busy you can barely move around.
My Workshop Blog:  https://doug.sdf.org/

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1618
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: Cabin Fever 2024
« Reply #27 on: February 12, 2024, 07:27:04 PM »
Very nice pictures Art.  It was a great show.  I’m so happy that I made it this year.  It was nice to catch-up with some familiar faces. 

My Elmer’s Tiny display ( full, half and quarter scale) is at 48:09 in Gil’s video.
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline maury

  • Full Member
  • ****
  • Posts: 518
    • Lone Star Engine Works
Re: Cabin Fever 2024
« Reply #28 on: February 13, 2024, 02:09:53 PM »
Y'all, thanks so much for posting the pictures and video for this years show.

I was really pleased to see two engines built from castings I once produced, the Marion and the Swan.

maury
Lone Star Engine Works Retitrd
"The trouble with socialism is that you eventually run out of other people's money."... Margaret Thatcher

Online Chipmaster

  • Full Member
  • ****
  • Posts: 1040
Re: Cabin Fever 2024
« Reply #29 on: February 13, 2024, 02:36:34 PM »
Excellent pictures thank you.
Andy

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal