Supporting > Casting
CASTING PARTS FROM TIN OR ZINC?
Kegan:
Hi everyone
I am new to casting but have been collecting materials to melt for a long time. I have only just recently gotten a house and a workshop and am planning my first foundry/furnace build in the next few month.
I have collected cast aluminium and cast zinc and tin items. Ive been learning to tell the difference lately, density seems to be a tell tale indicator. Items like belt guards can be made from aluminium quite easily and the material seems to suit such applications. But items like the base of machines, lathe beds and such call for a heavier material like cast iron. Take the Quorn tool cutter for example.
So has anyone used tin or zinc or zamak or alumimium-bronze to make parts for projects like the Quorn etc? I noticed my Myford ML7 Apron is made from a metal that is not aluminium or cast iron, correct me if I am wrong.
If this topic has been covered sufficiently please accept my apologies and point me in the right direction. If you have experience with any of this please share. I like to experiment and my budget is tight so I like out the box ideas. Simply buying ingots of the right type of material is not an option for me at this time.
Thank you for your time
Kegan
A7er:
Hi Kegan.
I am not 100% sure, but I don't think you would find many workshop bits and bobs made from cast tin. I would think it was too weak, and too expensive!
Aluminium can be a lot stronger, and cheaper. An alloy such as ZL12 is very heavy, machines well and is readily available. Many amateurs use aluminium car wheels to save trying to buy ingots.
Zinc is something else. It forms 88% of ZL12, the other 12% is aluminium. Many casters steer clear of using it because the fumes from melting zinc can be a bit dangerous. I don't know how dangerous, so please read up on it. Zinc is also found in brass, so be carefull melting brass too.
I am trying to buy tin mined here in Cornwall. Rocking horse poo is more common.
One last thing about tin. Pewter has tin in it and melts at about the same temp. I am not sure how to tell the difference between tin and pewter unless there is a hallmark, or some other marking.
Lee
Alyn Foundry:
Hi Kegan.
I may not be able to provide much information about sand casting with MAZAK or ZAMAK as it’s more commonly known these days but I use it extensively in metal dies. It has quite remarkable strength and is also a very capable bearing material for our model engines. It has a fairly low melting point and, because of its density allows for easy
“ gravity “ die casting.
If you’re on a budget you can make a very simple “ pit furnace “ by digging a hole in the ground and lining it with Clay. Alongside the pit bury a 2” diameter Steel pipe that communicates with the bottom of the pit. Set some kindling going and then build a fire from dry wood blocks. Put your crucible in the centre and provide a good draft of air from an inflatable bed inflator. An old friend of mine used this system for many years and was capable of melting Iron, Brass, Bronze and obviously, Aluminium.
The beauty of this method means that you’re not trying to lift and manoeuvre molten metal over obstacles. Just lift out to ground level and pour your moulds. For Aluminium almost any stainless Steel pot like article can be used to melt in. For the higher temperature metals I would really recommend the use of proper crucibles.
:cheers: Graham.
Pictures of die cast big end bearing shells and gravity die.
Alyn Foundry:
Lee has made a very valid point about safety.
Brass and its alloys contain Zinc. At high temperatures it burns off in a White cloud and if inhaled makes you feel very nauseous. The “ Zinc jitters “ was a common name for it. Brass founders ague….
With using scrap MAZAK you can keep the temperature low enough for it not to oxidise however good ventilation is highly recommended.
:cheers: Graham.
Kegan:
Thank you Graham and Lee for your responses, much appreciated. Also, thank you for posting pics. Its wonderful to see what others can achieve, it certainly helps to motivate and encourage me.
Kegan
Navigation
[0] Message Index
[#] Next page
Go to full version