Author Topic: not a Mississippi steamer  (Read 1640 times)

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
not a Mississippi steamer
« on: March 17, 2023, 06:04:30 PM »
Today a ship came by, which has adjusted to the constant low water of the Elbe. But it's high tide at the moment.

<a href="https://www.youtube.com/watch?v=0dZQsNaGkqA" target="_blank">http://www.youtube.com/watch?v=0dZQsNaGkqA</a>

Michael

Offline crueby

  • Full Member
  • *****
  • Posts: 18559
  • Rochester NY
Re: not a Mississippi steamer
« Reply #1 on: March 17, 2023, 06:18:57 PM »
Very modern ship, but definitely still a sternwheeler, quite an interesting design! The sternwheel design is not common in Europe, is it? Mostly sidewheel that I have seen before.

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #2 on: March 17, 2023, 07:03:33 PM »
There were also ships with stern wheel drive on the Elbe. Earlier with steam and later with diesel engine.
But they were rare.
I suspect the new ship not only with the stern wheel drive. The blades are rigidly mounted. They do not dive vertically into the water. It kind of looks like it.

Michael

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: not a Mississippi steamer
« Reply #3 on: March 17, 2023, 07:39:44 PM »
Looks very strange to me - almost like the water is turning the Wheels and not the other way around, where the wheels are moving the water (= moving the ship in the water) ....
You can also see that the wheels are lifting the water up to a substancial height .... + I agree with Michael that they are a strange shape for propulsion ....

Or put in another way - I'm wondering if the Wheels aren't there just as Show Pieces and Not Propulsion ....

Per

Offline crueby

  • Full Member
  • *****
  • Posts: 18559
  • Rochester NY
Re: not a Mississippi steamer
« Reply #4 on: March 17, 2023, 07:42:56 PM »
Very possible that it  uses either  props or a jet drive below and in front of the  wheels.

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #5 on: March 17, 2023, 07:55:55 PM »

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #6 on: March 17, 2023, 07:58:50 PM »
I hope that google translates it but there are only the two rear wheel drives.
Perhaps the engineers forgot that adjustable blades existed more than 100 years ago.

Offline vtsteam

  • Full Member
  • ****
  • Posts: 753
Re: not a Mississippi steamer
« Reply #7 on: March 18, 2023, 01:40:50 AM »
A loooooong low vessel. Cool looking. Why the radar bow and stern?
Steve

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: not a Mississippi steamer
« Reply #8 on: March 18, 2023, 11:20:08 AM »
Thank you for the link Michael - it is interesting.

It tell us that there are more propulsions onboard - but they can usually only stear and do not really add to forward or reverse.

A more strange thing is that it states that it was build with the fixed Paddles we see in Michaels video from yesterday - but that they have been upgraded to the Excenter driven type we see on all the old Steam-Paddlers  ....
So did somebody 'Downgrade them during the Winter'  :???: and why go back to the less Effecient design of non-moving blades  :headscratch:

Impressive low Draught on this Hull Design  :praise2:

Radars - I see that they are down to Roof level (most likely to clear low bridges in Hamburg) -> resulting in a 180-200 degree view from each Radar Antenna -> combined 360 view.

Per
« Last Edit: March 18, 2023, 11:23:35 AM by Admiral_dk »

Offline vtsteam

  • Full Member
  • ****
  • Posts: 753
Re: not a Mississippi steamer
« Reply #9 on: March 18, 2023, 01:40:40 PM »
As a possible reason, rigid wheels can be built stronger... maybe an advantage where light groundings are expected, or where heavy flotsam is a problem.
Steve

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #10 on: March 18, 2023, 05:50:26 PM »
The ship has a radar fore and aft. That should be better for the narrow river.

Michael

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #11 on: March 18, 2023, 06:06:41 PM »
it looks like the blades are movable. And it should be the main drive. In front there are two powerful moveable bow thrusters.

Michael

Offline crueby

  • Full Member
  • *****
  • Posts: 18559
  • Rochester NY
Re: not a Mississippi steamer
« Reply #12 on: March 18, 2023, 06:30:11 PM »
Those look much more efficient, the blades will change angle to keep them pushing vertically as they rotate.  The picture from the Wikipedia page is from 2016, these must be the better ones the installed after that. Would make a good model!   :stickpoke:

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #13 on: March 18, 2023, 09:47:58 PM »
oh Chris, I already have so many projects in mind.
Build a steamboat with a paddle wheel, very challenging!
I looked through old pictures, there were steamers with a tail wheel in my city about 100 years ago. And also the steamers with 2 rear wheels. All workhorses. A steamer has been moored in the city center on land since 1974. Was pulled ashore immediately after the last trip by Russian armored recovery vehicles and a restaurant set up there. Incidentally, there is also the steering machine on deck, a completely different design, and the anchor winch. I also believe the steam winch to lower the chimney.

Michael

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: not a Mississippi steamer
« Reply #14 on: March 18, 2023, 10:07:23 PM »
Your picture in post #11 is exactly what I expected the update to be - but I can't see that being the same Wheel in the Video ....
The blades in the Picture are always in a Horizontal position - but the ones in the Video are Not  :noidea:

No matter - we are not here to solve that question - and the Ship + Propulsion is nice to look anyway  :cheers:

Per

Edit in Italic - to clarify
« Last Edit: March 19, 2023, 12:26:57 PM by Admiral_dk »

Offline crueby

  • Full Member
  • *****
  • Posts: 18559
  • Rochester NY
Re: not a Mississippi steamer
« Reply #15 on: March 18, 2023, 10:27:52 PM »
oh Chris, I already have so many projects in mind.
Build a steamboat with a paddle wheel, very challenging!
I looked through old pictures, there were steamers with a tail wheel in my city about 100 years ago. And also the steamers with 2 rear wheels. All workhorses. A steamer has been moored in the city center on land since 1974. Was pulled ashore immediately after the last trip by Russian armored recovery vehicles and a restaurant set up there. Incidentally, there is also the steering machine on deck, a completely different design, and the anchor winch. I also believe the steam winch to lower the chimney.

Michael
Well, if it has a different  steering  engine, you will just have to build a model of each!   :Lol:




Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #16 on: April 08, 2023, 06:11:27 PM »
Today a real paddle steamer passed me. The "Dresden" built in 1926.
She is on her way from Dresden to Hamburg.
I tried to greet the ship with signals.

Michael


<a href="https://www.youtube.com/watch?v=TMaAh69EFDE" target="_blank">http://www.youtube.com/watch?v=TMaAh69EFDE</a>

Offline crueby

  • Full Member
  • *****
  • Posts: 18559
  • Rochester NY
Re: not a Mississippi steamer
« Reply #17 on: April 08, 2023, 06:35:57 PM »
Excellent video!  Could hear the sounds of the engine as it went past, very nice!

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: not a Mississippi steamer
« Reply #18 on: April 08, 2023, 09:34:48 PM »
I think that you where answered from the ship - I never heard 3 different whistles used before - then again, there might be different requirements in Germany from the ones in Denmark  ;D

Per     :cheers:

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7863
  • Portland, Oregon, USA
Re: not a Mississippi steamer
« Reply #19 on: April 08, 2023, 11:01:55 PM »
Very cool video, Michael!  :ThumbsUp:

Kim

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #20 on: April 09, 2023, 11:48:13 AM »
Hello Per, the vapers have this steam whistle with 3 chambers.
I answered with the whistle of my traction engine, which I temporarily mounted on the wall outside.
I don't know of any particular order of greeting.

Michael

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3752
  • Søften - Denmark
Re: not a Mississippi steamer
« Reply #21 on: April 09, 2023, 05:36:04 PM »
Interesting Whistle you got there  :ThumbsUp:

OK - I better start by saying that I don't have any knowledge about how to use the whistle (or more correct - I've learned some as a child, but 50 years later  :headscratch: ) ....
My Maternal Grandparents had a very nice Summer Cottage in Sejs, on the banks of Gudenåen (the only River in Denmark - the rest are not big enough to be called rivers in the Danish language) and the Worlds oldest Paddle Steamer (that has sailed the same route, every Summer since 1861) sails by four times every day - so I have seen her many times in my childhood.

Here some pictures and Video (including the Engine) <a href="https://www.youtube.com/watch?v=PqjyHYjh8Sc" target="_blank">http://www.youtube.com/watch?v=PqjyHYjh8Sc</a>

But, I have never heard the Whistle used so much as in your Video - especially without any other boats or ships in sight .... this is why I expect that he is replying you Michael  :cheers:

Per

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #22 on: April 09, 2023, 07:03:24 PM »
a nice little paddle steamer!
At the big steamboat meeting in Flensburg, the ships always gave each other three beeps when they met. First one ship three times, then the other ship three times. Is perhaps a custom on the high seas.
Inland shipping does not know this.

Michael

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #23 on: April 17, 2023, 07:11:29 PM »
and back


<a href="https://www.youtube.com/watch?v=DlfE3J2-Qjg" target="_blank">http://www.youtube.com/watch?v=DlfE3J2-Qjg</a>

Offline crueby

  • Full Member
  • *****
  • Posts: 18559
  • Rochester NY
Re: not a Mississippi steamer
« Reply #24 on: April 17, 2023, 07:59:24 PM »
Great video!  Love when the passengers  cheered the whistles. That ship would make a great RC model.

Online mklotz

  • Full Member
  • *****
  • Posts: 2620
  • LA, CA, USA
    • SOFTWARE FOR PEOPLE WHO BUILD THINGS!
Re: not a Mississippi steamer
« Reply #25 on: April 17, 2023, 08:00:43 PM »
PD bedeutet Paddel Dampfer, nicht wahr?  Ein wunderschönes Schiff.
Regards, Marv
Home Shop Freeware
https://www.myvirtualnetwork.com/mklotz

Offline Michael S.

  • Full Member
  • ****
  • Posts: 1110
  • Germany, Saxony-Anhalt, Magdeburg
Re: not a Mississippi steamer
« Reply #26 on: April 17, 2023, 08:39:09 PM »
Hello Marv,

you could think so.
The PD stands for "Personen Dampfer" in German.
It marks the ship for people only.
At that time there were parallel paddle steamers only for towing ships without engines.
Up to seven ships with cargo hung on a paddle steamer.


Greetings Michael

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal