Help! > Tooling Review

small bandsaw repair/improvement..

(1/1)

tghs:
my Little Machine shop 4829 small bandsaw that has seen little use started having the blade get out of the guides,, found that one guide mount/block did not have clearance and the bearing was binding,, in the removal part of this the threads and bearing bolts were buggered and stripped. :rant: picked up some new bolts,, drilled and thread inserted the base,, milled the blocks for a correct fit.. all is working well again..  :whoohoo: still not happy that this required doing..

Kim:
Too bad it happened :(  But excellent repair job!  :ThumbsUp:

Kim

Admiral_dk:
Great that you got it running well again  :ThumbsUp: - but I agree - these things should last much much longer than some of them do  :wallbang:

Per

Navigation

[0] Message Index