Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
I to have a 11 x 28 and although the finish may not be the best the work that can be done on them is fine. This is some of what comes off mine.
I spent hours looking for a better quality lathe in this 10" size range. An 11" may be a different story but I couldn't get one to fit. A 12" lathe would be a great size for hobby use, at least for the parts I do, but that's a much bigger machine. I believe a Taiwanese machine would be a quality improvement but don't think anyone makes one of these.My PM1022 is a little rough, i.e. not swiss quality. But is does function well and I'm happy with the purchase. I think you're right, Precision Matthews is one of the better Chinese quality machines.So, this doesn't say much but I hope it is of some use in your search. If you have questions of the PM1022 I may be able to answer them.Thanks.
Congrats on the completed conversion. Let us know how things look as you put your new lathe in service. Funny you should mention the Tiwanese machines. I an really eyeing the PM 728VT mill. It made me wonder what a complimentary Tiwanese lathe would look like/cost - I'm not aware of one on the market. I wonder if that's a twinkle in PM's eye.
Years ago there was a guy in Toronto who planned how to move a large Emco lathe into his basement. His wife did not want that thing going through the house…Everything ready, he was sitting reading something like the newspaper or a magazine.then when his wife went out shopping for a few hours; front entrance carpeting pulled back, lathe brought in, lifted with chain hoist, floor and beams cut, lathe lowered, then front entrance put back together.Said his wife never noticed how it got down there… he got the lathe he wanted.Where there is a will, there is a way, fortunately my partner has no problem with my hobby.
Be sure to let us know what you end up with. Thanks.
Honestly, I want (need?) both a lathe and mill update. The stand for the PM 1022 lathe is back ordered so it pushed me over the edge in this direction.
I ordered my PM1022 lathe with the stand. I really didn't like the stand. Ended up building a heavy wood rolling bench for it. Right now the blue stand is holding my Sherline, no problem with that weight. Where are you? I have a stand for you real cheap.Would you get a reduction in shipping if you ordered the mill and lathe together? Still might come at different times so no sharing a ride.
Thanks! Unfortunately I'm quite far from SD. I'm in MA. What about the stand do you not like? Perhaps I should explore a 3rd party option (a different manufacturer's stand, or a toolchest as I've seen others do) ...My current mini-lathe is on a stout (and I'd like to think rather handsome) wood cabinet. For some reason I don't have the heart to build another one.