Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Hello ChrisJust a thought. The base plate 'casting' would look great if you were to us something like a 1.5R x 6 or a 2R x 6 bull nose, radiused cutter to machine the webs in the base plate. Other sizes are also available. A bull nose radiused cutter would create a neat fillet rather than a sharp edge. You will find a bull nose radiused cutter is so much nicer to use than a ball nose and leaves a smooth flat surface between the filletsCheersMike
Quote from: Vixen on September 16, 2022, 09:42:12 PMHello ChrisJust a thought. The base plate 'casting' would look great if you were to us something like a 1.5R x 6 or a 2R x 6 bull nose, radiused cutter to machine the webs in the base plate. Other sizes are also available. A bull nose radiused cutter would create a neat fillet rather than a sharp edge. You will find a bull nose radiused cutter is so much nicer to use than a ball nose and leaves a smooth flat surface between the filletsCheersMikeI'll go look those up, never knew about them. Thanks for the tip!