Author Topic: DRO for Samantha Bell!  (Read 2203 times)

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 11778
  • Central Massachusetts, USA
Re: DRO for Samantha Bell!
« Reply #60 on: June 21, 2022, 12:59:06 AM »
I wish Chris!   I've looked under the machines and the bench     Not seeing it!!!!


It up and tight, and .003 over 35 or so inches is about as good as I can get....so I'm calling that....now to the readhead.....but first I rest my leg....major leg cramp!!!!    Not good with 30 feet of Orthopedic wire holding my patella tendon together!    Hurts!


Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 11778
  • Central Massachusetts, USA
Re: DRO for Samantha Bell!
« Reply #61 on: June 21, 2022, 01:37:05 AM »
Spec is 0.1mm /meter...or about .004/40"....so I'm not done yet.....I'll keep tweeking it ...it's going to take a while....

Dave
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline propforward

  • Full Member
  • ****
  • Posts: 1602
  • MN, USA
Re: DRO for Samantha Bell!
« Reply #62 on: June 21, 2022, 01:14:58 PM »
Yeah - it's a process. You're doing great though - it will be well worth it.
Stuart

Forging ahead regardless.

Offline crueby

  • Full Member
  • *****
  • Posts: 14473
  • Rochester NY
Re: DRO for Samantha Bell!
« Reply #63 on: June 21, 2022, 03:25:29 PM »
I wish Chris!   I've looked under the machines and the bench     Not seeing it!!!!
...
Check the attic and the dog house - you may have some BIG shop gnomes!   :ROFL: