Welcome to ModelEngineMaker !If you have problems registering or logging in, please use the contact menu option to request assistance.
Hi Ron, thanks for this post here.And also thanks to Mike (Vixen) for the idea to show it this way.The other day I have done a similar thing with Fusion 360.For Fusion folks.........Drawings in Fusion can be exported by PDF only, that does makes no sense to post it here, only a picture of a sample drawing below.So if you load the model and the relevant adjustment in the sketch is done, the drawing with dimensioning and comments has to be made individually.
If it is a Data Base, it should be without comments or chit chat.
With respect to having a collection of this data in one location, I'm considering starting a Topic along the lines suggested by Dan Rowe for that purpose. This wouldn't be a true database by any means, just a collection of (presumably) image files showing the data. What I am imagining is setting up a few separate threads at the top of a new Topic into which the image files could be placed as attachments. The separate threads would help organization by being "categories". For example, there could be one for "Supercharged" and one for "Normally Aspirated". Maybe another thread could hold just templates like the ones posted earlier in this thread. To populate the threads, folks could PM their files to me, and I, as the thread "owner" would "modify" the thread to insert them.Consider this a proposal. Not having ever done something like this, it may not be the best way. If it is of limited interest it may not be worth the effort, and that is OK too. I will wait for feedback before doing anything.
It is just meant as food for thought .....A note on the graph reminding people that - 'This represents the Cam (or other device) timing - to get Crank position, please multiply by two' - or similar.