Author Topic: My new project : Diesel 4 Cyl  (Read 1463 times)

Offline Minh Thanh

  • Full Member
  • ****
  • Posts: 63
My new project : Diesel 4 Cyl
« on: January 06, 2022, 05:09:43 AM »
Hi All !!
My new project : Diesel 4 Cyl
I will design and build : 1940 Kromhout Gardner 4LW

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7862
  • Portland, Oregon, USA
Re: My new project : Diesel 4 Cyl
« Reply #1 on: January 06, 2022, 05:44:59 AM »
That should be an interesting project!
Kim

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: My new project : Diesel 4 Cyl
« Reply #2 on: January 06, 2022, 06:54:02 AM »
Looks to be a fun Project  :ThumbsUp:  :ThumbsUp:  Those engines were well respected for reliability and Efficiency.
Best regards

Roger

Offline Zephyrin

  • Full Member
  • ****
  • Posts: 766
  • near Paris, France
Re: My new project : Diesel 4 Cyl
« Reply #3 on: January 06, 2022, 10:06:20 AM »
Amazing project, good luck with it !
at which scale ?

Offline Laurentic

  • Full Member
  • ****
  • Posts: 310
  • Nr Yeovil, Somerset, England
Re: My new project : Diesel 4 Cyl
« Reply #4 on: January 06, 2022, 11:00:35 AM »
Golly gosh - that will be quite some project, good luck and best wishes for a successful project.

Chris

Offline wagnmkr

  • Full Member
  • ****
  • Posts: 914
  • Lindsay, Ontario, Canada
Re: My new project : Diesel 4 Cyl
« Reply #5 on: January 06, 2022, 12:34:23 PM »
Another interesting project to watch!
I was cut out to be rich ... but ... I was sewn up all wrong!

Offline Minh Thanh

  • Full Member
  • ****
  • Posts: 63
Re: My new project : Diesel 4 Cyl
« Reply #6 on: January 06, 2022, 01:33:57 PM »
Thanks for the commentsand wishes !
About the scale: I haven't calculated it yet, but the diameter cylinder is about 19 - 20 mm
  I am thinking and designing an oil pump system, everything is too small and many components inside...And the pump camshaft is too small
« Last Edit: January 06, 2022, 01:38:04 PM by Minh Thanh »

Offline Minh Thanh

  • Full Member
  • ****
  • Posts: 63
Re: My new project : Diesel 4 Cyl
« Reply #7 on: February 08, 2022, 01:29:08 PM »
Hi All !
A update
 

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: My new project : Diesel 4 Cyl
« Reply #8 on: February 08, 2022, 05:46:59 PM »
Looks good  :) , are you intending to cast the parts of make from bar stock?
Best regards

Roger

Offline Minh Thanh

  • Full Member
  • ****
  • Posts: 63
Re: My new project : Diesel 4 Cyl
« Reply #9 on: February 09, 2022, 01:37:31 AM »
Hi Roger !
 I will make an engine from bar stock
I know very little about cast  and haven't cast anything yet

Offline cnr6400

  • Full Member
  • *****
  • Posts: 2729
Re: My new project : Diesel 4 Cyl
« Reply #10 on: February 09, 2022, 02:02:18 AM »
it will be an interesting build!  :cheers:  :ThumbsUp: :popcorn:
"I've cut that stock three times, and it's still too short!"

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal