Help! > Specific Engine Help

Snow tandem double acting I.C. engine

(1/2) > >>

gbritnell:
Ladies and Gentlemen,
I purchased a copy of the book, Build the Snow, from Village Press. In going through the drawings it requires 4 lip seals with a part number of NOK AC8054 -EOS. It also gives references to several companies that apparently handle these seals. I have spent the greater part of the morning trying to find these seals. Needless to say without much luck.
My request is for those who have built the Snow or otherwise know where these seals can be found.
I live in Ohio in the U.S. and have 2 companies, Mcmaster-Carr and Grainger who usually have almost everything needed but they don't have them either. They have the seals for the .312 shaft diameter but the O.D. is too large.
Thanks,
gbritnell

crueby:
Hi George,
Only ones I see are without the 'S' on the end:
https://www.bestpartsonline.com/snow-engine-seal-5-16-x-9-16-x-1-8-and-039-ref-ac8054-e0?search=AC8054-E0&description=true
That one even says 'snow engine seal'.
If thats not it, I can ask my contact at Village Press.
Chris

crueby:
Another source that I have used many times,
https://www.theoringstore.com/store/index.php?main_page=index&cPath=700_1049
Great if you know the dimensions you need, they carry a big variety of styles. I think the ones you are looking for are the SC type lip seals.
Chris

gldavison:
George

I believe S&S has those. 

http://www.cncengines.com/snowengine.html

GordonL:
I built one of those and I ended up using standard O rings and they seemed to work just fine  I never ran it for very long and I no longer have the engine.

Navigation

[0] Message Index

[#] Next page