Author Topic: Upshur Flywheels  (Read 555 times)

Offline rick41

  • Full Member
  • ****
  • Posts: 33
Upshur Flywheels
« on: August 31, 2021, 02:50:45 PM »
I am starting to build the Upshur Hit and Miss Engine featured in the Strictly I.C. magazine.  The plans call for 3-1/2" flywheels.  Your thoughts on substituting 3" heavy duty cast iron flywheels in lieu of the 3-1/2" shown in the plans?  I think they will work.  Tell me if I am wrong.  Rick

Offline Brian Rupnow

  • Full Member
  • *****
  • Posts: 6939
  • Barrie, Ontario Canada
Re: Upshur Flywheels
« Reply #1 on: September 01, 2021, 12:11:08 AM »
That will work fine.---Brian