Author Topic: Tryally Tech QCTP  (Read 696 times)

Offline paul gough

  • Full Member
  • ****
  • Posts: 435
  • Tropical Queensland, Australia
Tryally Tech QCTP
« on: August 17, 2021, 11:54:00 AM »
Here is a link to Luiz Ally's quick change tool holder and tools suitable for Sherline lathes. Anybody seen or used one and any thoughts on them. Now that A2Z is defunct, these might prove worthwhile.
https://tryally.com/qctp-quick-change-tool-post
Regards, Paul Gough.

Offline Hugh Currin

  • Full Member
  • ****
  • Posts: 678
  • Box Elder, SD, USA
    • www.currin.us
Re: Tryally Tech QCTP
« Reply #1 on: August 17, 2021, 03:57:48 PM »
It looks like the site just started and the QCTP is the first and only product. Interesting.

However, Luiz Ally has done a lot of work and some amazing videos using Sherlines. Very inventive. I've built some tooling based on his videos. Highly recommended, particularly if you're using a Sherline.

Thanks.
Hugh

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 5410
  • Portland, Oregon, USA
Re: Tryally Tech QCTP
« Reply #2 on: August 17, 2021, 04:28:01 PM »
Huh... I didn't know A2Z was gone :(
What happened?  I have their tool holder for my Taig...

Kim

Offline paul gough

  • Full Member
  • ****
  • Posts: 435
  • Tropical Queensland, Australia
Re: Tryally Tech QCTP
« Reply #3 on: August 17, 2021, 05:00:15 PM »
My understanding is the proprietor died. Paul Gough