Author Topic: RIP John Moore  (Read 500 times)

Offline Bluechip

  • Full Member
  • ****
  • Posts: 921
  • Derbyshire
RIP John Moore
« on: June 09, 2021, 11:10:19 AM »
Health not been too good for some time.

https://www.model-engineer.co.uk/forums/postings.asp?th=173417&p=1#PostTop

As Dekko said could appear to be a bit blunt at times but I always enjoyed his company and he gave me some very good advice.

Bon Voyage Bogs.

Dave

« Last Edit: June 09, 2021, 11:15:04 AM by Bluechip »

Offline Vixen

  • Full Member
  • ****
  • Posts: 2080
  • Hampshire UK
Re: RIP John Moore
« Reply #1 on: June 09, 2021, 11:57:40 AM »
RIP 'Bogs'.

Good to have known you

Mike
It is the journey that matters, not the destination

Offline Admiral_dk

  • Full Member
  • ****
  • Posts: 2141
  • S°ften - Denmark
Re: RIP John Moore
« Reply #2 on: June 09, 2021, 12:15:25 PM »
He was one of the very first members here and made some great contributions.

Sad to hear about his death - baut he was not well the last many years I hope that he will RIP.

Offline Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 14069
  • Hampshire, england.
Re: RIP John Moore
« Reply #3 on: June 09, 2021, 12:26:12 PM »
That is sad news.

John's contribution to model engineering was substantial and will always stand as a fitting tribute to him  :)

Jo
Enjoyment is more important than achievement.

Offline ShopShoe

  • Full Member
  • ****
  • Posts: 378
  • Central Iowa, Central USA
Re: RIP John Moore
« Reply #4 on: June 09, 2021, 01:13:05 PM »
So Sad to hear this news.

I had a few exchanges with him over the years and appreciated every one of them: He had a way of making you learn something new with every post, even if it was not what you wanted to hear (read).

R-I-P

ShopShoe

Offline propforward

  • Full Member
  • ****
  • Posts: 1059
  • MN, USA
Re: RIP John Moore
« Reply #5 on: June 09, 2021, 01:24:57 PM »
I had a pleasant exchange with him some years ago, and his many posts and advice will be a great legacy. He was very much into helping newcomers to the hobby, even if he was very uncompromising. A significant character who will be missed for sure.
« Last Edit: June 09, 2021, 09:53:17 PM by propforward »
Stuart

Offline Bearcar1

  • Full Member
  • ****
  • Posts: 761
  • Chicagoland Area, USA
Re: RIP John Moore
« Reply #6 on: June 09, 2021, 02:21:42 PM »
I am sorry to hear of this and my prayers go out to his family. I had began wondering how he was as I had not seen any postings from him for quite some time. He will perhaps be long remembered for his very well documented, in-depth article on building a twin cylinder marine type engine named The Paddleducks"
 May the Good Lord rest his eyes.


BC1
Jim




Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1503
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: RIP John Moore
« Reply #7 on: June 09, 2021, 09:49:51 PM »
Sorry to hear of this.  Rest In Peace John.

I believe Bogs was the first or second M.E.M. member.  I believe he started this forum with AdeV when we all left the other site.  He was instrumental in the birth of this forum.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Offline Don1966

  • Full Member
  • *****
  • Posts: 6398
  • Morgan City, LA (Along the Gulf Coast)
Re: RIP John Moore
« Reply #8 on: June 10, 2021, 03:01:39 AM »
R.I.P. Bogs and thank you for the contributions we all enjoyed.



 :cheers:
Don

Offline Pete49

  • Full Member
  • ****
  • Posts: 696
  • top of the gulf SA, Gateway to the Flinders Ranges
Re: RIP John Moore
« Reply #9 on: June 10, 2021, 04:04:46 AM »
Thanks for the advice and help Bogs. Now you chat to the other modellers over there and enjoy.R.I.P
I used to have a friend.....but the rope broke and he ran away :(

Offline Stilldrillin

  • Full Member
  • ****
  • Posts: 681
  • Staveley, Derbyshire. England.
Re: RIP John Moore
« Reply #10 on: June 16, 2021, 09:53:46 PM »
May you Rest In Peace, John.

Thank you.....

David.
David.
Still modifying bits of metal... Occasionally, making an improvement!
Still drilling holes... Sometimes, in the right place!