Author Topic: Did I realy do that?  (Read 1517 times)

Offline Admiral_dk

  • Full Member
  • ****
  • Posts: 2188
  • S°ften - Denmark
Re: Did I realy do that?
« Reply #15 on: June 01, 2021, 10:43:20 PM »
Quote
They say that experience only comes with time and that this experience allows you to make silly mistakes with total confidence.  :old:

 :lolb:

Offline Tom1948

  • Full Member
  • ****
  • Posts: 16
Re: Did I realy do that?
« Reply #16 on: June 02, 2021, 02:14:57 AM »
Thanks for sharing. If you are like me you call yourself some bad names when that happens. 

Offline bent

  • Full Member
  • ****
  • Posts: 525
  • Wet side of Washington State, USA
Re: Did I realy do that?
« Reply #17 on: June 02, 2021, 05:49:49 PM »
 :embarassed:

I've done worse...machined a fixture the other day here at work, clamping a 4" pipe in a vise rather than toe clamping it down securely (bah, that will take too long = famous last words).  0.5 inch carbide endmill went bang when the part slipped up out of the vise jaws.  Luckily nothing injured other than the idiot engineer's pride.