Author Topic: Did I realy do that?  (Read 9882 times)

Offline Vixen

  • Full Member
  • *****
  • Posts: 3275
  • Hampshire UK
Did I realy do that?
« on: May 31, 2021, 10:46:59 AM »
As the title says: Did I realy do that?      :lolb: :lolb:



Then, did I realy try to drill a hole with it?

Concentrate lad          :hammerbash: :hammerbash:

Mike
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline simplyloco

  • Full Member
  • ****
  • Posts: 620
Re: Did I realy do that?
« Reply #1 on: May 31, 2021, 11:45:16 AM »
I'm told that old age is a downward spiral. Where will it lead and where will we land? Is there no point? :shrug:
Strong minds discuss ideas, average minds discuss events, weak minds discuss people.” ― Socrates

Offline cnr6400

  • Full Member
  • *****
  • Posts: 3119
Re: Did I realy do that?
« Reply #2 on: May 31, 2021, 01:41:49 PM »
As the title says: Did I realy do that?      :lolb: :lolb:



Then, did I realy try to drill a hole with it?

Concentrate lad          :hammerbash: :hammerbash:

Mike

It's just going to take a lot longer and need a lot of pressure with that setup Mike!   :Lol:   :cheers:

With my previous mill, which had reversable spindle, I turned a number of drills and endmills a lovely blue colour before realizing it was turning the wrong way..... :facepalm:  :cussing:

(and before anyone gets too clever, no, not on the same day!  :Lol:)
"I've cut that stock three times, and it's still too short!"

Online crueby

  • Full Member
  • *****
  • Posts: 19561
  • Rochester NY
Re: Did I realy do that?
« Reply #3 on: May 31, 2021, 02:42:35 PM »
I've seen circular saw blades in backwards, this is a new one!

Offline propforward

  • Full Member
  • ****
  • Posts: 1656
  • MN, USA
Re: Did I realy do that?
« Reply #4 on: May 31, 2021, 03:24:37 PM »
I actually find this reassuring, and I appreciate you posting it.
Stuart

Forging ahead regardless.

Offline Art K

  • Full Member
  • ****
  • Posts: 1813
  • Madison, Wisconsin USA
Re: Did I realy do that?
« Reply #5 on: May 31, 2021, 04:05:13 PM »
Hey Mike, isn't that the tool used to burnish a hole? Been there done that.
Art
"The beautiful thing about learning is that no one can take it away from you" B.B. King

Offline gldavison

  • Full Member
  • ****
  • Posts: 225
  • Tarkio, Mo.
Re: Did I realy do that?
« Reply #6 on: June 01, 2021, 02:01:46 AM »
I hate too admit it, but I put a band saw blade on the wrong way once. Didn't realize till it won't cut. :cussing:

Gary
Windows 10 & 11, Alibre Design Pro V28, IntelliCADPro6, CamBam, Mach4, 3D Printers, Cetus, Anet ET5 X
15" South Bend, 10" Logan lathe, Grizzly square column mill, CNC router & Hot wire cutter, Lagun FTV-1 knee mill, Sherline mill & lathe

Offline Pete49

  • Full Member
  • ****
  • Posts: 738
  • top of the gulf SA, Gateway to the Flinders Ranges
Re: Did I realy do that?
« Reply #7 on: June 01, 2021, 03:54:07 AM »
WOW!! I made a heap of silly things in the shed like running a drill backwards and cursing because it won't cut but not done that yet. Doesn't mean I wont but not yet. You're a real pioneer in this field Mike.  :lolb: :lolb: :ROFL: :mischief: :-[
I used to have a friend.....but the rope broke and he ran away :(....Good news everybody I have another friend...I used chain this time :)

Offline Nobby Sideways

  • Full Member
  • ****
  • Posts: 15
Re: Did I realy do that?
« Reply #8 on: June 01, 2021, 06:44:56 AM »
I think a lot of us have run a lathe backwards and wondered why it wouldn't cut. While still quite inexperienced (honest!) I managed to do a fair bit of machining in reverse... wondering why everything was getting red hot and progress was incredibly slow....

Online Jo

  • Administrator
  • Full Member
  • *****
  • Posts: 15409
  • Hampshire, england.
Re: Did I realy do that?
« Reply #9 on: June 01, 2021, 08:50:43 AM »
Somewhere I have a left hand drill.... it took me a while to realise why is was not cutting very well  :Doh:

Jo
Enjoyment is more important than achievement.

Offline fumopuc

  • Full Member
  • *****
  • Posts: 3482
  • Munich, Germany, EU
Re: Did I realy do that?
« Reply #10 on: June 01, 2021, 08:56:43 AM »
Time to shut down and to close the shed door for this day.
Taking the bicycle and doing a little tour to the lake in our village.
That is my action if I realize these things.
And believe me, I do know the way to the lake and back very well.
 
« Last Edit: June 01, 2021, 09:13:24 AM by fumopuc »
Kind Regards
Achim

Offline Admiral_dk

  • Full Member
  • *****
  • Posts: 3953
  • Søften - Denmark
Re: Did I realy do that?
« Reply #11 on: June 01, 2021, 11:49:18 AM »
Like Achim I can only say that blonders made in the Workshop are more often than I care to admit - and it's only getting better with age  :facepalm2:

Offline Vixen

  • Full Member
  • *****
  • Posts: 3275
  • Hampshire UK
Re: Did I realy do that?
« Reply #12 on: June 01, 2021, 12:26:57 PM »
Thanks everyone,

I thought my little faux par would amuse you.

They say that experience only comes with time and that this experience allows you to make silly mistakes with total confidence.  :old:

Mike
« Last Edit: June 01, 2021, 01:36:05 PM by Vixen »
It is the journey that matters, not the destination

Sometimes, it can be a long and winding road

Offline Allen Smithee

  • Full Member
  • ****
  • Posts: 1138
  • Mordor, Middle Earth
Re: Did I realy do that?
« Reply #13 on: June 01, 2021, 01:21:23 PM »
That's one of those undrills that you use to undrill holes that are in the wrong place...

To quote from my flying instructor's mantra:

"Wisdom comes from knowledge and experience.
Knowledge can come from education and training, but experience is about learning from mistakes.
And the best mistakes to learn from are those made by other people."

Me? My entire career has been an endless succession of learning opportunities...

AS
« Last Edit: June 01, 2021, 01:25:39 PM by Allen Smithee »
Quidquid latine dictum sit altum sonatur

Offline AVTUR

  • Full Member
  • ****
  • Posts: 254
  • West of England
Re: Did I realy do that?
« Reply #14 on: June 01, 2021, 07:19:51 PM »
I usually try to drill holes in masonary with the ordinary portable electric running backwards. It is difficult enough when the drill is rotating the right direction.

AVTUR
There is no such thing as a stupid question.

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal