Author Topic: New to this group - Stan Stocker  (Read 325 times)

Offline Stan Stocker

  • Jr. member
  • **
  • Posts: 1
New to this group - Stan Stocker
« on: May 06, 2021, 09:41:27 PM »
Hi Folks,

I'm Stan Stocker.  Retired, in the past I've done various nerdy and occasionally interesting things for Westinghouse Defense, Martin Marietta/ Lockheed Martin, then had a clock restoration business once fed up with the Beltway Bandit existence.  Been to all but 2 Cabin Fever Expos, founding member of CAMS, the usual stuff.

Have a mix of manual and smaller CNC machinery, will soon be putting together a CNC lathe and a larger CNC router.

once done wrapping up some renovations at our retirement place, more time to play in the shop will hopefully appear.  This time of year more hours go on the tractor than the lathe...

Too many casting sets fully aged, not enough machined and completed :-)

Thanks for letting me join the gang,
Stan

Online propforward

  • Full Member
  • ****
  • Posts: 1057
  • MN, USA
Re: New to this group - Stan Stocker
« Reply #1 on: May 06, 2021, 09:43:57 PM »
Welcome aboard - looking forward to seeing your chip making.
Stuart

Offline RonGinger

  • Full Member
  • ****
  • Posts: 281
  • Boothbay Maine USA
    • Pleasant Cove Models
Re: New to this group - Stan Stocker
« Reply #2 on: May 06, 2021, 10:52:56 PM »
Hello Stan, good to hear from you. I enjoyed having dinner with you at Cabin Fever, and sure wish we could do that again. Your contributions here should be very  helpful.

Online Dave Otto

  • Full Member
  • *****
  • Posts: 4060
  • Boise, Idaho USA
    • Photo Bucket
Re: New to this group - Stan Stocker
« Reply #3 on: May 07, 2021, 12:31:21 AM »
Hi Stan
Welcome to MEM!

Dave

Offline RReid

  • Full Member
  • ****
  • Posts: 121
  • Northern California
Re: New to this group - Stan Stocker
« Reply #4 on: May 07, 2021, 12:35:28 AM »
Welcome to the group Stan!
Ronald

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 4595
  • Portland, Oregon, USA
Re: New to this group - Stan Stocker
« Reply #5 on: May 07, 2021, 02:08:13 AM »
Hi Stan,
Welcome to the forum!
Kim

Offline tvoght

  • Full Member
  • ****
  • Posts: 983
  • Indiana
Re: New to this group - Stan Stocker
« Reply #6 on: May 07, 2021, 02:25:53 AM »
Welcome Stan. Your name is extremely familiar to me. I think you may have been a regular poster on a mailing list I have been on in the past. Maybe the taigtools group? In any case, I expect you will have valuable input.

--Tim

Offline dozerdroid

  • Full Member
  • ****
  • Posts: 5
Re: New to this group - Stan Stocker
« Reply #7 on: May 07, 2021, 02:53:16 AM »
hi Stan from a fellow cams member, Khim

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 4842
  • Switzerland
Re: New to this group - Stan Stocker
« Reply #8 on: May 07, 2021, 07:03:24 AM »
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:
Best regards

Roger

Offline Don1966

  • Full Member
  • *****
  • Posts: 6398
  • Morgan City, LA (Along the Gulf Coast)
Re: New to this group - Stan Stocker
« Reply #9 on: May 07, 2021, 02:08:36 PM »
Welcome one to the forum Stan!



 :hi:
Don