Author Topic: New member  (Read 1162 times)

Offline rbgearz

  • Jr. member
  • **
  • Posts: 3
New member
« on: April 22, 2021, 08:40:02 PM »
Been lurking for awhile, reading all the posts. Recently retired as a machinist/millwright. Spent the last couple years recovering from a motorcycle accident. Decided to start a project. Started accumulating materials and ordered the plans for the tiny inline 4. Will see how it goes. Cheers to all!
Roy

Offline propforward

  • Full Member
  • ****
  • Posts: 1656
  • MN, USA
Re: New member
« Reply #1 on: April 22, 2021, 08:42:50 PM »
Welcome aboard - sorry to hear about the accident, I hope you are recovered or recovering well.

Looking forward to following along with your project!
Stuart

Forging ahead regardless.

Offline RReid

  • Full Member
  • ****
  • Posts: 1668
  • Northern California
Re: New member
« Reply #2 on: April 22, 2021, 08:54:25 PM »
Welcome! And as the last new member before you, Thank You for promoting me off the bottom of the seniority list!
Regards,
Ron

Online Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 7860
  • Portland, Oregon, USA
Re: New member
« Reply #3 on: April 22, 2021, 09:10:40 PM »
Hi there rbgearz,
Welcome to the forum!
Kim

Offline rbgearz

  • Jr. member
  • **
  • Posts: 3
Re: New member
« Reply #4 on: April 22, 2021, 09:45:33 PM »
Thanks for the welcome!
 After 5 surgeries I'm mostly recovered from my accident. Might need one more in the future but things are looking up. Need to finish my bike that was totaled but it's almost done.
 Kim....followed your Rudy K traction engine build. Very well done. That one is on my list.
Roy

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 4693
  • Boise, Idaho USA
    • Photo Bucket
Re: New member
« Reply #5 on: April 22, 2021, 09:48:48 PM »
Welcome to MEM!

Dave

Offline propforward

  • Full Member
  • ****
  • Posts: 1656
  • MN, USA
Re: New member
« Reply #6 on: April 22, 2021, 11:09:42 PM »
Thanks for the welcome!
 After 5 surgeries I'm mostly recovered from my accident. Might need one more in the future but things are looking up.

Well you have my sympathies. I went through it too. But I'm still here, so I have that going for me.

Best wishes.
Stuart

Forging ahead regardless.

Offline Don1966

  • Full Member
  • *****
  • Posts: 6817
  • Columbia, MS
Re: New member
« Reply #7 on: April 23, 2021, 12:27:05 AM »
Welcome to the forum.... :hi:



 :cheers:
Don

Offline 90LX_Notch

  • Full Member
  • ****
  • Posts: 1613
  • North Eastern Pennsylvania USA
    • YouTube Channel
Re: New member
« Reply #8 on: April 23, 2021, 12:28:18 AM »
Welcome Roy, looking forward to your first build.

-Bob
Proud Member of MEM

My Engine Videos on YouTube-
http://www.youtube.com/user/Notch90usa/videos

Online Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 6133
  • Switzerland
Re: New member
« Reply #9 on: April 23, 2021, 07:10:48 AM »
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:
Best regards

Roger

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal