Author Topic: Elmers No. 29 First Run  (Read 416 times)

Offline arona

  • Full Member
  • ****
  • Posts: 15
Elmers No. 29 First Run
« on: June 21, 2021, 07:42:03 AM »
Elmers #29 First run.


Greetings

arona

Offline joe d

  • Full Member
  • ****
  • Posts: 390
  • Montreal, Canada
Re: Elmers No. 29 First Run
« Reply #1 on: June 21, 2021, 12:04:11 PM »
Nice runner.  Well done!

Joe

Offline cnr6400

  • Full Member
  • ****
  • Posts: 1116
Re: Elmers No. 29 First Run
« Reply #2 on: June 21, 2021, 12:39:33 PM »
 :ThumbsUp: :ThumbsUp: :ThumbsUp: great runner!

Offline Flyboy Jim

  • Full Member
  • ****
  • Posts: 1971
  • Independence, Oregon
Re: Elmers No. 29 First Run
« Reply #3 on: June 21, 2021, 02:05:44 PM »
Congratulations on a fine looking and running engine.  :ThumbsUp:

Jim
Sherline 4400 Lathe
Sherline 5400 Mill
"You can do small things on big machines, but you can do small things on small machines".

Online propforward

  • Full Member
  • ****
  • Posts: 1103
  • MN, USA
Re: Elmers No. 29 First Run
« Reply #4 on: June 21, 2021, 03:00:18 PM »
That's great - a really fun engine!
Stuart

Offline RReid

  • Full Member
  • ****
  • Posts: 225
  • Northern California
Re: Elmers No. 29 First Run
« Reply #5 on: June 21, 2021, 03:12:32 PM »
Congratulations Arona! You did a fine job of building an interesting engine, it looks and runs great!  :ThumbsUp:
Regards,
Ron

Offline bent

  • Full Member
  • ****
  • Posts: 525
  • Wet side of Washington State, USA
Re: Elmers No. 29 First Run
« Reply #6 on: June 21, 2021, 04:52:24 PM »
Nice job, and great video!

Offline Don1966

  • Full Member
  • *****
  • Posts: 6432
  • Morgan City, LA (Along the Gulf Coast)
Re: Elmers No. 29 First Run
« Reply #7 on: June 22, 2021, 03:14:49 AM »
Awesome always a treat to seee them run after all the time and effort. Nice work…… :Love:



 :cheers:
Don

Online Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 4920
  • Switzerland
Re: Elmers No. 29 First Run
« Reply #8 on: June 22, 2021, 07:43:42 PM »
Splendid  :praise2:  :wine1:
Best regards

Roger

Offline Mike Bondarczuk

  • Full Member
  • ****
  • Posts: 180
Re: Elmers No. 29 First Run
« Reply #9 on: June 23, 2021, 08:26:32 AM »
Hi Arona,

Lovely build of the Elmer engine and did you face any challenges from converting the drawings into metal, as some of his drawings either have discrepancies or omissions and I hope to start a similar build soon.

Thanks, Mike
"Everything I can't find is in a totally secure place"

Offline Vilbrequin

  • Jr. member
  • **
  • Posts: 2
Re: Elmers No. 29 First Run
« Reply #10 on: June 23, 2021, 06:36:01 PM »
 :ThumbsUp: :ThumbsUp: :ThumbsUp: