Author Topic: Neil Lickfold  (Read 821 times)

Offline Neil-Lickfold

  • Full Member
  • ****
  • Posts: 67
Neil Lickfold
« on: January 10, 2019, 06:47:11 PM »
Hi to all,
I'm Neil Lickfold,  currently a cnc machine operator / toolmaker, and also a model engine /full size  engine nut.
I have made quite a few model engines over the years, but my involvement has mainly been with Control line speed, team race, combat, stunt engines, as well as Pylon racing engines.
I like to look at new technologies of the day , and try new to me materials quite often.
I do most of my work on a Myford super 7 lathe and basic Mill drill, and a small cnc wood work router that uses mach3.
Neil

Offline Roger B

  • Global Moderator
  • Full Member
  • *****
  • Posts: 3985
  • Switzerland
Re: Neil Lickfold
« Reply #1 on: January 10, 2019, 06:54:16 PM »
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:

Pictures of engines and workshops are always welcome  :)
Best regards

Roger

Offline steamer

  • Global Moderator
  • Full Member
  • *****
  • Posts: 10316
  • Central Massachusetts, USA
Re: Neil Lickfold
« Reply #2 on: January 10, 2019, 07:28:00 PM »
Welcome Neil!
"Mister M'Andrew, don't you think steam spoils romance at sea?"
Damned ijjit!

Offline b.lindsey

  • Global Moderator
  • Full Member
  • *****
  • Posts: 13649
  • Dallas, NC, USA
    • Workbench-Miniatures
Re: Neil Lickfold
« Reply #3 on: January 10, 2019, 07:34:57 PM »
Hi Neil and  :hi:. Thanks for the introduction as well. Pictures would be wonderful too once you get settled in here.

Bill

Offline Ramon

  • Full Member
  • ****
  • Posts: 1744
  • Suffolk in the UK
Re: Neil Lickfold
« Reply #4 on: January 10, 2019, 08:51:27 PM »
Welcome Neil, good to see you here and looking forwards to having your input on model aircraft engines  :ThumbsUp:

Hope we live up to expectations

Regards - Tug
"I ain't here for the long time but I am here for a good time"
(a very apt phrase - thanks to a well meaning MEM friend)

Offline Kim

  • Global Moderator
  • Full Member
  • *****
  • Posts: 3668
  • Portland, Oregon, USA
Re: Neil Lickfold
« Reply #5 on: January 11, 2019, 01:08:03 AM »
Hi Neil,
Welcome to the forum!
Kim

Offline Dave Otto

  • Full Member
  • *****
  • Posts: 3599
  • Boise, Idaho USA
    • Photo Bucket
Re: Neil Lickfold
« Reply #6 on: January 11, 2019, 01:29:23 AM »
Hi Neil, welcome to MEM!

Dae

Offline Smechie

  • Jr. member
  • **
  • Posts: 3
Re: Neil Lickfold
« Reply #7 on: January 11, 2019, 06:52:12 PM »
Hey Neil,
I am new myself so welcome from smechie!
"Well there is always a bigger hammer"