Model Engine Maker

About MEM => Introduce Yourself => Topic started by: perello on July 13, 2019, 09:11:11 PM

Title: Greeting from Barcelona
Post by: perello on July 13, 2019, 09:11:11 PM
Hi all,

I am just an old passionate for small IC engines and a maker wannabe located in Barcelona.

Occasionally I use my EMCO C8 lathe and a EMCO FB2 for small work..trying to learn.

cheers
Title: Re: Greeting from Barcelona
Post by: b.lindsey on July 13, 2019, 09:49:11 PM
Hi and welcome to the forum perello. This is a great place to learn and a great group of people ready to help out. Glad to have you.

Bill
Title: Re: Greeting from Barcelona
Post by: MJM460 on July 13, 2019, 10:23:40 PM
Hi Perello, Welcome to the forum.  Plenty of helpful people here to encourage you to get that lathe going.

MJM460
Title: Re: Greeting from Barcelona
Post by: fumopuc on July 14, 2019, 05:12:23 AM
Hi Perello,
welcome to MEM.
Good to see that there are more of us enthusiasts here in Europe.


Title: Re: Greeting from Barcelona
Post by: Kim on July 14, 2019, 07:12:48 AM
Hi Perello,
Welcome to the forum!
Kim
Title: Re: Greeting from Barcelona
Post by: Roger B on July 14, 2019, 08:21:36 AM
Welcome to the Forum  :ThumbsUp:  :ThumbsUp:
Title: Re: Greeting from Barcelona
Post by: Dave Otto on July 14, 2019, 05:04:15 PM
Welcome to MEM!

Dave
Title: Re: Greeting from Barcelona
Post by: mike mott on July 15, 2019, 02:50:28 AM
Hi Perello and Welcome from Canada I am recently back on the forum and active. This is a helpful forum full of great people. 
Mike